Tripp Lite
Tripp Lite U436-06N-2P5 USB-C 2.5Gbps network card
USB-C 3.2 adapter adds a 2.5 Gbps RJ45 port for wired Ethernet up to 320 MB/s
- 5 Gbps wired speed for fast downloads and streaming
- USB 3.2 Gen 1 interface delivers up to 320 MB/s throughput
- Single RJ45 port supports 10/100/1000Base-T networks
- Bus-powered design needs no external power supply
- Works with USB-C and Thunderbolt ports on laptops and tablets
Portable USB-C network adapter
This USB-C to RJ45 adapter adds a 2.5 Gbps wired Ethernet connection to laptops, tablets and MacBooks that lack a built-in port. It draws power from the host USB 3.2 Gen 1 port so no external supply is needed. A quick driver install may be required before first use. The single RJ45 jack accepts twisted-pair cabling for immediate network access.
Sustained 2.5 Gbps throughput
The adapter delivers up to 2.5 Gbps when linked to Cat8 cabling, maintaining that rate for large file downloads, video conferences and high-definition streams without buffering. It falls back to 10, 100 or 1000 Mbps on older infrastructure so performance scales with the available switch. Bus power ensures consistent operation during extended sessions.
Check host port and cabling
Verify the computer provides a USB-C or Thunderbolt port that supports USB 3.2 Gen 1 data rates. Ensure a Cat5e, Cat6, Cat6a or Cat8 patch cable is on hand because none is included. The adapter is not suited for builds needing internal PCIe cards or multiple simultaneous network ports.
Erősségek
- 5 Gbps wired speed for fast downloads and streaming
- USB 3.2 Gen 1 interface delivers up to 320 MB/s throughput
- Single RJ45 port supports 10/100/1000Base-T networks
- Bus-powered design needs no external power supply
- Works with USB-C and Thunderbolt ports on laptops and tablets
Műszaki adatok
Ehhez a termékhez egyelőre nincs közzétett műszaki adat.
Kérdések a termékről
Does the U436-06N-2P5 get hot or draw much power when running all day?
The bus-powered adapter draws its modest power directly from the USB-C port and has no fan, so it stays cool during continuous use.
What cable or port must I already have on my computer for this adapter to work?
You need a USB-C or Thunderbolt port on the host and a Cat5e, Cat6, Cat6a or Cat8 patch cable to reach the network.
Will the 2.5 Gbps link negotiate down to my existing 1000 Mbps switch without extra setup?
Yes, the RJ45 port supports 10/100/1000Base-T and will automatically fall back to the highest speed the switch advertises.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
NVIDIA ConnectX-7 MCX75343AMS-NEAC 400GbE network card
- InfiniBand: NDR/NDR…
- Single-port OSFP In…



