Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Rectangular silver metal power supply unit with multiple cables and connectors

WMtec

WMtec server power supply 240W D12-240P3B for HP ProDesk 400 600 G1 G2 SFF

SKU CH-9RG3-CMNX7

240 W replacement PSU for HP ProDesk 400, 600 and EliteDesk 800 SFF models with 6-pin motherboard, 4-pin CPU and control cables

  • 240 W output powers HP ProDesk 400 and 600 G1 G2 SFF
  • 6-pin motherboard connector plus 4-pin CPU cable ensures correct fit
  • 32 cm main cable and 60 cm CPU cable reach SFF chassis easily
  • Compact 15.5 × 7.3 × 9.5 cm design fits small-form-factor cases
  • Replaces D12-240P3B PCE011 DPS-200PB-196A across six compatible HP models

240 W SFF replacement PSU

This 240 W power supply is built for HP ProDesk 400 G1, 400 G2, 600 G1, 600 G2, 690 G1 and EliteDesk 800 G1 small-form-factor desktops. It matches the D12-240P3B, PCE011 and DPS-200PB-196A part numbers used in those chassis. Buyers who need a higher wattage unit or a standard ATX form factor cannot use this model.

Installation uses proprietary 6-pin motherboard

The unit provides a 6-pin motherboard connector on a 32 cm lead, a motherboard control cable on a 30 cm lead and a 4-pin CPU connector on a 60 cm lead. Cables are fixed and keyed for the target SFF boards, so no adapter hunting is required. Builders who expect modular cabling or standard 24-pin ATX connectors will find this supply incompatible.

Steady 240 W output in compact 15.5 × 7.3 × 9.5 cm

The supply delivers its rated 240 W continuously within the small-form-factor enclosure without relying on short-term peak ratings. Thermal design follows the original HP specification for sustained office workloads. Systems that draw more than 240 W under load will exceed this unit's capacity.

Erősségek

  • 240 W output powers HP ProDesk 400 and 600 G1 G2 SFF
  • 6-pin motherboard connector plus 4-pin CPU cable ensures correct fit
  • 32 cm main cable and 60 cm CPU cable reach SFF chassis easily
  • Compact 15.5 × 7.3 × 9.5 cm design fits small-form-factor cases
  • Replaces D12-240P3B PCE011 DPS-200PB-196A across six compatible HP models

Műszaki adatok

Ehhez a termékhez egyelőre nincs közzétett műszaki adat.

Kérdések a termékről

How can I confirm the D12-240P3B is working after I install it in my ProDesk 400 G2 SFF?

The system should power on normally and the fan inside the 15.5 x 7.3 x 9.5 cm unit should spin; the motherboard receives power through the 6-pin P1 connector and the CPU through the 4-pin P3 connector.

What cables come with the D12-240P3B and what must I source separately for an HP ProDesk 600 G1 SFF?

The unit includes a 32 cm 6-pin motherboard cable (P1), a 30 cm control cable (P2) and a 60 cm 4-pin CPU cable (P3); no extra cables are required for the listed models.

Which of the listed part numbers — D12-240P1A, D12-240P2A or D12-240P3B — should I choose for my EliteDesk 800 G1 SFF?

All three D12-240P variants are compatible with the EliteDesk 800 G1 SFF; select the exact part number printed on your original supply to match the connector keying.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.