Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

Zyvpee

Zyvpee GB0506PGV1-A CPU Cooler Fan 5V 1.9W 3 Pin Maglev

SKU CH-JQJ3-M5DQD

Maglev bearing CPU cooler fan runs at 5V and 1.9W with a three-pin connector for ASUS X51 series laptops

  • TypeCPU Cooler Fan
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Maglev bearing reduces friction for quiet operation
  • 5 V 1.9 W power draw limits energy use
  • Three-pin connector enables speed monitoring
  • Blower design directs airflow onto heatsink
  • Compatible with ASUS X51 series laptops

Purpose and fit

The Zyvpee GB0506PGV1-A is a replacement CPU cooling fan built for specific ASUS notebook models including the X51, X51R, X51L, X51RL and X51H. It uses a maglev bearing and a 3-pin 5 V connection drawing 1.9 W. Buyers who need a different connector, voltage or form factor cannot use this part.

Interface and control limits

The fan runs on a 3-wire 3-pin header at 5 V and 1.9 W, so speed reporting depends on the laptop’s own fan controller. No PWM wire is present, meaning the board must regulate voltage for speed changes. Systems that only provide 4-pin PWM headers or a different voltage will not drive this fan correctly.

Installation notes

Installation requires opening the notebook chassis and matching the original 3-pin connector orientation exactly. The maglev bearing reduces friction but offers no alignment guides; forcing the plug or mis-routing the cable can damage the header. Verify the part number 13.V1.B2482.F.GN against the sticker on the old fan before fitting.

Erősségek

  • Maglev bearing reduces friction for quiet operation
  • 5 V 1.9 W power draw limits energy use
  • Three-pin connector enables speed monitoring
  • Blower design directs airflow onto heatsink
  • Compatible with ASUS X51 series laptops

Műszaki adatok

BrandZyvpee
SeriesGB0506PGV1-A
ModelGB0506PGV1-A
TypeCPU Cooler Fan
Bearing TypeMaglev
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling

Kérdések a termékről

Which Zyvpee GB0506PGV1-A version matches my laptop?

The GB0506PGV1-A is listed for ASUS X51, X51R, X51L, X51RL and X51H models; check your service manual or the label on the original fan for the 13.V1.B2482.F.GN part number.

What does the 5 V 1.9 W rating mean once the fan is installed?

It draws 1.9 W from a 5 V header, so the motherboard supplies the current needed for the maglev blower to run at its design speed.

What does the 3-pin connector limit in practice?

The three wires carry power, ground and a tachometer signal; the board can monitor RPM but cannot send PWM speed commands to this fan.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.