Zyvpee
Zyvpee GM2404PQB1-8A 40*28mm 24V 2.9W 3-Wire Case Fan
A 40 mm by 28 mm DC case fan with ball bearing, 24 V, 2.9 W and a 3-wire power connector
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector3 Wires
- ColorBlack
- LEDNon-LED
- Compact 40 × 28 mm frame fits tight chassis spaces
- 24 V, 2.9 W motor draws minimal power
- Three-wire connector enables speed monitoring
- Ball bearing ensures long, quiet operation
- Non-LED black design keeps builds clean
Compact 40 mm ball-bearing fan
The Zyvpee GM2404PQB1-8A is a 40 by 28 millimetre case fan that runs on 24 volts and draws 2.9 watts. It uses a three-wire power connector and a ball bearing for continuous operation in tight chassis spaces. The black, non-LED frame keeps the appearance neutral.
Fits 24 V three-wire headers only
Builds that supply a 24 volt three-wire header can use this fan directly. Systems that provide only a different voltage or a two-wire or four-wire header cannot connect it without an adapter or a voltage change.
24 V 2.9 W three-wire specification
The single deciding specification is the 24 volt 2.9 watt three-wire electrical interface. If the chassis or controller does not match that exact combination, the fan will not operate as intended.
Erősségek
- Compact 40 × 28 mm frame fits tight chassis spaces
- 24 V, 2.9 W motor draws minimal power
- Three-wire connector enables speed monitoring
- Ball bearing ensures long, quiet operation
- Non-LED black design keeps builds clean
Műszaki adatok
| Brand | Zyvpee |
|---|---|
| Series | GM2404PQB1-8A |
| Model | GM2404PQB1-8A |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 3 Wires |
| Color | Black |
| LED | Non-LED |
| Features | DC Case Fan |
| Dimensions | 40*28mm |
Kérdések a termékről
What does the 2.9W rating mean once the fan is running in my system?
At 24V the fan draws 2.9W, so it adds only a small load to the power supply while delivering 40×28mm airflow.
How does the three-wire connection affect speed control?
The three-wire lead provides power, ground and a tachometer signal; it supports RPM monitoring but not PWM speed control.
Will the 40×28mm frame fit my case's 40mm mounting holes?
Yes, the 40mm square frame matches standard 40mm mounting points and the 28mm thickness clears most chassis walls.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001043BTC
Raktáron