Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Ten aqua duplex fibre cables with LC connectors, 3.3 ft each

10Gtek

10Gtek LC-LC OM3 Duplex 50/125 LSZH 10-Pack 3.3 ft

SKU CH-F6JV-Y9BM5

Ten OM3 duplex patch cords with LC connectors, 3.3 ft each, bend-insensitive for dense cabinets, LSZH jacket, 0.3 dB insertion loss

  • TypeOptical Patch Cord
  • Color10 Pack
  • Length3.3 ft.

Option 10 Pack

Length 6.6 ft.

  • Supports 10 Gigabit Ethernet up to 300 meters
  • 5 mm bend radius fits dense cabinets without signal loss
  • LSZH jacket meets UL 910 and RoHS standards
  • Low 0.3 dB insertion loss keeps link budget healthy
  • Ten cables per pack simplifies multi-port deployments

Ten-Pack OM3 Duplex Cables

This ten-pack supplies LC-to-LC OM3 multimode patch cords for 10 Gigabit Ethernet links up to 300 meters. Each cord uses 50/125 micron bend-insensitive fiber with a 7.5 mm minimum bend diameter. The LSZH jacket meets TIA 568-C.3, UL 910, CE and RoHS requirements for indoor installations. Insertion loss is .3 dB and return loss is 30 dB.

Upgrade from Standard 50 Micron Cables

The bend-insensitive design tolerates four times tighter routing than standard 50 micron cables without macro-bending loss. This jump matters when cabinets demand 20 or more bends or when high-density trays leave no slack. It replaces older OM1 or OM2 jumpers that cannot support 10GBase-SR distances. Buyers who need single-mode reach or 25 Gigabit lanes should look elsewhere.

High-Density Cabinet Integration

LC duplex connectors plug directly into SFP+ transceivers from major vendors including Cisco, Ubiquiti, Intel, Netgear and Mellanox. The 3.3 ft length keeps patch panels tidy in server farms, telecom rooms and cloud storage racks. The LSZH sheath reduces smoke in plenum spaces. No special tools are required beyond a standard fiber cleaner and inspector.

Privalumai

  • Supports 10 Gigabit Ethernet up to 300 meters
  • 5 mm bend radius fits dense cabinets without signal loss
  • LSZH jacket meets UL 910 and RoHS standards
  • Low 0.3 dB insertion loss keeps link budget healthy
  • Ten cables per pack simplifies multi-port deployments

Specifikacijos

Brand10Gtek
TypeOptical Patch Cord
Color10 Pack
Length3.3 ft.

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What minimum bend diameter does the 10Gtek LC-LC OM3 cable support?

The cable has a 7.5mm minimum bend diameter, four times more flexible than standard 50/125 fiber, allowing tight routing in high-density cabinets without macro-bending loss.

How do you correctly insert the LC duplex connectors into an SFP transceiver?

Align the keyed LC duplex clip with the transceiver port, push straight in until the latch clicks, and verify the link light; forcing the connector at an angle can damage the ferrule end-face.

When should these OM3 patch cords be replaced in a 10GbE link?

Replace if insertion loss exceeds 0.3 dB or return loss drops below 30 dB, if the LSZH jacket shows cuts or kinks, or after repeated re-terminations that risk ferrule contamination.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.