NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
A-Tech
High-capacity 128 GB DDR4 2933 MHz ECC registered DIMM for server workloads
This A-Tech module is a 128GB DDR4 2933MHz PC4-23400 ECC Registered DIMM built with Samsung chipset. It operates at 1.20V with CL21 latency and a 4Rx4 rank configuration. The 288-pin DIMM is designed as a compatible replacement for the Samsung M393AAG40M3B-CYF part number. It targets server and workstation systems requiring high-capacity registered memory with error correction.
This memory suits administrators upgrading compatible servers or workstations that support DDR4 2933MHz ECC RDIMM modules in a 4Rx4 organisation. It is not for desktop PCs or laptops that accept only unbuffered non-ECC UDIMMs. It is also not for systems limited to lower ranks or speeds below PC4-23400. Buyers must verify their platform's qualified vendor list before purchase.
The single specification that determines fit is the 4Rx4 registered ECC organisation running at DDR4 2933MHz (PC4-23400). Many server chipsets restrict the number of load-reduced or quad-rank modules per channel, so this rank structure dictates whether the motherboard can address the full 128GB capacity. If the system requires 1Rx4, 2Rx4 or 2Rx8 ranks instead, this module will not function correctly.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Samsung |
| Model | M393AAG40M3B-CYF |
| Capacity | 128GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2S2Rx4 (4Rx4) |
| Chipset | Samsung Chipset |
| Features | M393AAG40M3B-CYF |
The module uses the standard 288-pin DDR4 DIMM form factor and 1.20 V operating voltage, matching the physical and electrical specification of DDR4 RDIMM slots in compatible servers.
Align the notch with the slot key, press firmly until both side latches click shut, then verify in BIOS that the 128 GB capacity and 2933 MT/s speed are recognised; skipping the latch check is the common mistake.
Replace the module if the system logs uncorrectable ECC errors, fails to POST with the module installed, or the firmware shows a reduced memory capacity.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?