Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular DDR4 DIMM module with black chips and gold contacts

A-Tech

A-Tech 16GB DDR4 2933MHz ECC RDIMM 1Rx4 Server Memory

SKU CH-FZPH-QP0GN

16 GB DDR4 ECC registered DIMM running at 2933 MHz with CL21 latency and 1.2 V operation

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR4 2933 MHz boosts server throughput
  • ECC registered design protects data integrity under load
  • 1Rx4 single-rank layout optimises memory-channel efficiency
  • 2 V DDR4 standard voltage reduces power draw
  • Tested compatible replacement for HP L58117-001

What this module does and who needs it

This 16 GB DDR4 ECC RDIMM is a registered server memory upgrade built to replace HP part L58117-001. It targets administrators who need to add capacity to compatible HP server or workstation platforms that require registered ECC modules. Buyers who need unbuffered UDIMM memory or non-ECC modules for consumer desktop boards cannot use this part.

The specification that decides fit

The module runs at DDR4 2933 MHz (PC4-23400) with CL21 latency at 1.20 V and uses a 1Rx4 rank organisation on a 288-pin DIMM. Your system must support registered ECC DDR4 at this speed and voltage; if the platform requires a different rank configuration, voltage or pin count the module will not function.

Installation notes and common issues

Installation is a standard DIMM insertion into the server memory slots, but the 288-pin registered form factor will not fit consumer 262-pin SODIMM sockets. The most frequent problem is purchasing without confirming the exact HP part number and supported memory list, which leads to returns when the system refuses to post.

Privalumai

  • 16 GB DDR4 2933 MHz boosts server throughput
  • ECC registered design protects data integrity under load
  • 1Rx4 single-rank layout optimises memory-channel efficiency
  • 2 V DDR4 standard voltage reduces power draw
  • Tested compatible replacement for HP L58117-001

Specifikacijos

BrandA-Tech
SeriesCompatible Replacement for HP
ModelL58117-001
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesL58117-001

Klausimai apie šią prekę

How does the 2933MHz speed translate once the module is installed in a server?

The module runs at DDR4 2933MHz (PC4-23400) with CL21 latency, delivering that data rate when the platform's memory controller is configured for 2933 MT/s.

What does the ECC RDIMM registered interface mean for system compatibility?

The module is an ECC Registered DIMM (1Rx4) that presents a registered clock-driver load to the memory controller and requires a platform that supports registered ECC DDR4 DIMMs.

Will the 288-pin DIMM fit my server's memory slots?

The module uses the standard DDR4 288-pin DIMM form factor (noted as 262-pin in some documentation), so it fits servers designed for DDR4 RDIMM slots.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.