Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 32GB DDR4 2933MHz ECC RDIMM 2Rx4 Server Memory

SKU CH-KP80-CFC2K

32 GB DDR4 2933 MHz ECC registered DIMM for server and workstation upgrades

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity handles demanding server workloads
  • DDR4 2933 MHz speed delivers high data throughput
  • ECC registered design protects data integrity
  • 2Rx4 dual-rank organisation increases memory density
  • 2 V operation matches standard DDR4 voltage

32GB DDR4 2933MHz ECC RDIMM

This 32GB DDR4 module runs at 2933MHz with CL21 latency and 1.20V operation. It is a registered DIMM with ECC and a 2Rx4 organisation built on Micron chipset. The 288-pin form factor fits server and workstation platforms that require registered ECC memory.

Suited for registered ECC platforms

Systems that demand registered ECC DDR4 at 2933MHz can use this module directly. Builders needing unbuffered memory, non-ECC operation, a different speed grade or a lower capacity should look at other modules that match those requirements.

Fits 288-pin registered DIMM slots

The module installs in standard 288-pin DDR4 RDIMM sockets and draws 1.20V. It frees the memory controller from handling single-bit errors thanks to on-board ECC. Verify your platform’s qualified vendor list and maximum supported capacity before installation.

Privalumai

  • 32 GB capacity handles demanding server workloads
  • DDR4 2933 MHz speed delivers high data throughput
  • ECC registered design protects data integrity
  • 2Rx4 dual-rank organisation increases memory density
  • 2 V operation matches standard DDR4 voltage

Specifikacijos

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA36ASF4G72PZ-2G9E2, MTA36ASF4G72PZ-2G9J3
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesMTA36ASF4G72PZ-2G9E2, MTA36ASF4G72PZ-2G9J3

Klausimai apie šią prekę

What motherboard slot is required for the 288-pin DDR4 DIMM?

The module fits a standard DDR4 DIMM socket with 288 pins on a server or workstation motherboard that supports registered ECC memory.

Can the CL21 2933 MHz module run in a system that currently uses slower DDR4 ECC RDIMMs?

Yes, it will down-clock to the highest speed the platform allows while keeping ECC and registered operation intact.

How can I confirm the 32 GB module is detected at 2933 MHz with ECC active after installation?

Check the BIOS memory information screen or run a tool such as dmidecode to verify speed, capacity, rank and ECC status.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.