Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green 240-pin DDR3 DIMM with black chips, silver edge contacts, and a white label showing 4GB 1600MHz ECC RDIMM

A-Tech

A-Tech 4GB DDR3 1600MHz ECC RDIMM 2Rx8 Server Memory

SKU CH-2FY8-5BKF2

4GB DDR3 1600MHz ECC registered server DIMM with CL11 latency and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors in servers
  • Registered signal buffering improves stability under load
  • 4 GB capacity adds responsive multitasking headroom
  • DDR3 1600 MHz speed matches PC3-12800 specification
  • 240-pin DIMM form factor fits standard server slots

Server Memory Upgrade

This 4 GB DDR3 1600 MHz registered ECC module is built for server and workstation platforms that require error-correcting memory. It replaces the Micron MT18JSF51272PDZ-1G6M1 part and fits 240-pin DIMM slots. The dual-rank 2Rx8 organisation suits systems designed for registered DIMMs.

Thermals and Power

Operating at the standard DDR3 voltage of 1.5 V, the module draws typical power for its class and runs within normal server thermal envelopes. Registered buffering reduces electrical load on the memory controller, helping stability under sustained workloads. No additional cooling beyond standard chassis airflow is required.

Compatibility and Assurance

Every unit undergoes quality-assurance testing before shipment to verify reliable operation in qualified systems. Buyers must confirm their platform supports DDR3 registered ECC DIMMs, as this module will not work in consumer desktop boards or laptops that require unbuffered non-ECC memory.

Privalumai

  • ECC protection prevents data errors in servers
  • Registered signal buffering improves stability under load
  • 4 GB capacity adds responsive multitasking headroom
  • DDR3 1600 MHz speed matches PC3-12800 specification
  • 240-pin DIMM form factor fits standard server slots

Specifikacijos

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18JSF51272PDZ-1G6M1
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMT18JSF51272PDZ-1G6M1

Klausimai apie šią prekę

How do I install this 240-pin DDR3 RDIMM and what step do people often get wrong?

Align the notch on the module with the key in the 240-pin DDR3 slot, press firmly until both retention clips click shut, and ensure the registered module is seated in a slot that supports registered DIMMs — the step most often missed is verifying the motherboard accepts RDIMMs before installation.

What maintenance or replacement will this ECC RDIMM need later?

No routine maintenance is required; the module either continues operating or develops correctable errors that ECC handles, and replacement is only needed if uncorrectable errors appear or system diagnostics report a persistent fault.

What limit appears first when this 1.50V CL11 module runs under sustained load?

The DDR3 1600 CL11 timing and 1.50V voltage set the performance ceiling; under sustained load the memory controller reaches its maximum throughput at these specifications before thermal throttling becomes a factor.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.