Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green 240-pin DDR3L ECC RDIMM with black chips

A-Tech

A-Tech 4GB DDR3L 1333 ECC RDIMM 2Rx4 Server RAM

SKU CH-N30T-FF2JQ

A 4 GB DDR3L 1333 MHz ECC registered DIMM with 2Rx4 organisation and 1.35 V low-voltage operation for server upgrades

  • Capacity4GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC registered design protects data integrity in servers
  • 35 V DDR3L cuts power draw versus standard DDR3
  • 1333 MHz CL9 speed handles demanding workloads
  • 2Rx4 240-pin layout fits compatible server slots
  • Rigorous testing ensures dependable operation

Server RAM for Hynix Replacement

This 4GB DDR3L registered DIMM is built for servers and workstations that require ECC error correction. It matches the Hynix HMT151R7TFR4A-H9 part number and runs at 1333MHz with a low 1.35V voltage. The module uses major-brand chips and a 2Rx4 organisation for stable operation in multi-DIMM configurations.

Simple DIMM Installation Steps

Align the 240-pin module with the DDR3 slot, press down evenly until the retention clips click, and verify the system recognises the full capacity at POST. Because this is a registered ECC DIMM, it must be installed in a platform that supports registered memory; a standard desktop board will not initialise it. Mixing registered and unbuffered modules on the same channel will prevent boot.

The Spec That Decides Fit

The registered ECC design and 1.35V DDR3L signalling are the single factors that determine compatibility. Only systems explicitly qualified for DDR3L RDIMM memory at PC3L-10600 speed will accept this module. Buyers who need unbuffered non-ECC memory or a higher voltage DDR3 standard cannot use this part.

Privalumai

  • ECC registered design protects data integrity in servers
  • 35 V DDR3L cuts power draw versus standard DDR3
  • 1333 MHz CL9 speed handles demanding workloads
  • 2Rx4 240-pin layout fits compatible server slots
  • Rigorous testing ensures dependable operation

Specifikacijos

BrandA-Tech
Capacity4GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Klausimai apie šią prekę

How can I verify the 1.35V DDR3L 1333 module is running correctly after installation?

Enter the system BIOS or UEFI and confirm the memory is detected at 1333 MHz with CL9 timings and registered ECC status.

What is included in the box and what must be sourced separately?

The package contains one 4GB 240-pin DDR3L RDIMM; no cables, brackets or additional modules are supplied.

Which version should I choose if my server requires a Hynix HMT151R7TFR4A-H9 equivalent?

This 4GB 2Rx4 PC3L-10600 registered ECC DIMM is the direct replacement for that Hynix part number.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.