NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
A-Tech
8GB DDR3L 1333MHz ECC registered server DIMM, 2Rx8 at 1.35V for compatible systems
This 8GB DDR3L module replaces the Micron MT18KSF1G72PDZ-1G4P1 in compatible servers and workstations. It delivers 1333MHz speed with ECC and registered buffering for data integrity under heavy workloads. The 1.35V low-voltage design reduces power draw compared to standard DDR3. Builders needing a direct drop-in part for that Micron reference will find the matching specifications here.
The single deciding specification is the registered ECC RDIMM layout with 2Rx8 rank structure. Only systems that accept registered DDR3L DIMMs at CL9 latency and 1.35V can use this module. Desktop boards, consumer laptops or any platform requiring unbuffered non-ECC memory will not post with it installed. Verify your motherboard manual lists RDIMM support before ordering.
Each stick undergoes A-Tech quality assurance testing before shipment to confirm reliable operation at the rated 1333MHz PC3-10600 speed. The package contains only the memory module itself; no cables, brackets or software are included. A lifetime warranty and US-based technical support cover the part for as long as you own it. Buyers who need heat spreaders, RGB lighting or bundled diagnostics should look elsewhere.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MT18KSF1G72PDZ-1G4P1 |
| Capacity | 8GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Micron Chipset |
| Features | MT18KSF1G72PDZ-1G4P1 |
The module is rated for DDR3L 1333 (PC3L 10600). It will operate at 1333 MHz if the platform supports that data rate; otherwise the system clock will step it down to the highest supported speed.
The stick requires a DDR3L-capable slot that supplies 1.35 V. A standard DDR3-only board running at 1.5 V will not power it correctly, so the platform must explicitly support low-voltage DDR3L.
It fits a 240-pin DDR3 DIMM socket with registered (RDIMM) keying. The module is 2Rx8 organised and uses the standard DDR3L notch position, so it will only seat in a compatible server or workstation slot.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?