Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

A-Tech

A-Tech 8GB DDR4 2133 ECC UDIMM 2Rx8 for Dell 370-ACFV 370-ACJC A8526300 H5P71 SNPH5P71C/8G Server RAM

SKU CH-ERY6-5JAWB

8GB DDR4 2133 ECC UDIMM with CL15 latency and 1.20V for compatible Dell servers

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity adds multitasking headroom for servers
  • DDR4 2133MHz speed accelerates data throughput
  • ECC UDIMM protects data integrity under load
  • 288-pin DIMM fits compatible Dell server slots
  • 2V operation reduces power draw per module

Compatible Dell Server Memory

This A-Tech 8GB DDR4 2133 module replaces Dell part numbers 370-ACFV, 370-ACJC, A8526300, H5P71 and SNPH5P71C/8G. It is built for servers and workstations that require ECC unbuffered memory to maintain data integrity under load. The single 288-pin DIMM delivers 8GB capacity at PC4-17000 speed with CL15 latency. It suits administrators upgrading compatible Dell platforms.

Straightforward DIMM Installation

Installation follows the standard 288-pin DDR4 DIMM procedure: power down the system, open the chassis, align the module key with the slot and press firmly until the retention clips engage. Because the module is unbuffered ECC, the platform must support ECC UDIMM topology; registered or load-reduced slots will not accept it. Verifying the system memory specification before purchase avoids a mismatch that prevents boot.

Suits ECC UDIMM Platforms Only

This module fits servers and workstations that specifically require DDR4 2133 ECC unbuffered memory in a 2Rx8 configuration. Builders needing registered ECC, load-reduced DIMMs, non-ECC memory or speeds other than 2133 MHz should look at other products. Systems limited to lower voltages than 1.2V or lacking 288-pin DDR4 slots cannot use this upgrade.

Privalumai

  • 8GB capacity adds multitasking headroom for servers
  • DDR4 2133MHz speed accelerates data throughput
  • ECC UDIMM protects data integrity under load
  • 288-pin DIMM fits compatible Dell server slots
  • 2V operation reduces power draw per module

Specifikacijos

BrandA-Tech
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Klausimai apie šią prekę

How can I confirm the module is running at 2133 MHz with CL15 timing after installation?

Check the memory speed and latency in BIOS or with a tool such as CPU-Z; the module should report DDR4-2133 (PC4-17000) at CL15.

What is included and do I need anything else to install this 288-pin DDR4 ECC UDIMM?

The box contains one 8 GB DDR4 2133 ECC UDIMM; no extra parts are required if your system has a free 288-pin DIMM slot supporting ECC unbuffered memory.

Should I choose the 2Rx8 version or a different rank for my Dell server?

Select the 2Rx8 module when your Dell part list shows 370-ACFV, 370-ACJC, A8526300, H5P71 or SNPH5P71C/8G; matching the rank ensures compatibility.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.