NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
A-Tech
8 GB DDR4 2400 ECC registered DIMM with 1Rx8 organisation and CL17 latency
This registered DIMM provides 8GB of ECC memory for server and workstation systems that require error correction. It operates at DDR4 2400 speed with CL17 latency and 1.20V voltage. The module uses a 1Rx8 organisation and major brand chips. It is a compatible replacement for the Samsung M393A1K43BB0-CRC part.
DDR4 2400 registered memory requires a platform that supports ECC RDIMMs and the PC4-19200 data rate. The registered buffer adds one clock cycle of latency compared to unbuffered modules. Systems limited to lower DDR4 speeds will downclock this module automatically. Non-server boards that lack registered DIMM support cannot use this memory.
Installation follows the standard 288-pin DIMM procedure: align the notch, press firmly until the retention clips engage, and verify seating. The most common issue is mixing registered and unbuffered modules in the same system, which prevents boot. Always confirm the motherboard qualification list before purchase to avoid compatibility mismatches.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This listing is for a single 8GB DDR4 2400 ECC RDIMM 1Rx8 module. Select it if your server needs one 8GB stick; add multiple units to reach the total capacity your motherboard supports.
The module runs at 2400MHz with a peak transfer rate of PC4-19200. Actual throughput depends on your platform's memory controller and how many DIMM slots are populated.
The 288-pin DDR4 RDIMM interface uses a register to buffer address and command signals, enabling stable ECC operation at 2400MHz. Maximum bandwidth is capped by the PC4-19200 specification and your system's memory controller.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?