NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
A-Tech
8GB DDR4 2666MHz desktop module with CL19 latency and 1.20V operation for AMD and Intel systems
This A-Tech module adds 8GB of DDR4 memory at 2666MHz with CL19 latency. It is an unbuffered, non-ECC DIMM built for standard desktop systems. The stick runs at the DDR4 standard voltage of 1.20V and uses major-brand chips. It targets users who want a straightforward capacity increase for everyday multitasking.
The module is specified as a compatible equivalent for the Crucial CT8G4DFD8266 part number. It matches the same DDR4 2666MHz PC4-21300 speed, 288-pin form factor, and 1.2V operation. The upgrade is worth it when your board has a free DIMM slot and supports this speed and density. No ECC or registered features are present, so it fits standard consumer platforms.
Verify that your motherboard accepts DDR4 DIMMs at 2666MHz and can handle an 8GB density per slot. Confirm the maximum total memory and the number of available 288-pin slots before ordering. The module is unbuffered and non-ECC, so it will not work in systems that require registered or error-correcting memory.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Yes, the module uses the 288-pin DDR4 DIMM form factor that matches any desktop motherboard slot built for DDR4 memory.
Align the notch with the slot key, press down evenly on both ends until the retention clips click, then verify 2666MHz operation in the BIOS.
Run a memory diagnostic if you see random crashes or corrupted files; otherwise the module requires no scheduled maintenance.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?