Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech Supermicro Certified 16GB DDR4 2666MHz 2Rx8 ECC RDIMM 288-Pin Server Memory

SKU CH-Q3TB-1BD9V

16 GB DDR4 2666 MHz ECC registered server memory module, 288-pin dual-rank RDIMM with Micron chips, Supermicro certified for reliable operation

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • Micron chipset ensures dependable DDR4 2666MHz operation
  • ECC registered design corrects errors for data integrity
  • 16GB dual-rank capacity handles heavier workloads
  • 20V standard voltage keeps power draw efficient

Supermicro Certified 16GB DDR4 RDIMM

This 16GB DDR4 2666MHz registered DIMM carries Supermicro certification and uses Micron chips. It is built for servers and workstations that require ECC error correction and registered signalling for stable operation under continuous load. The module runs at standard 1.20V with CL19 latency.

Registered ECC limits for DDR4 2666

Registered DIMMs add a buffer that reduces electrical load on the memory controller, allowing higher capacities per channel than unbuffered modules. ECC detects and corrects single-bit errors but cannot fix multi-bit failures. The DDR4 2666 standard caps the data rate at 2666 MT/s, so bandwidth is fixed by the specification.

Verify RDIMM support and slot layout

Confirm that your motherboard accepts DDR4 RDIMM modules and supports ECC Registered operation; some consumer boards only take unbuffered non-ECC memory. Check the qualified vendor list for the MEM-DR416L-CL03-ER26 part number and ensure enough 288-pin slots are free for the desired capacity.

Privalumai

  • Supermicro certified for guaranteed server compatibility
  • Micron chipset ensures dependable DDR4 2666MHz operation
  • ECC registered design corrects errors for data integrity
  • 16GB dual-rank capacity handles heavier workloads
  • 20V standard voltage keeps power draw efficient

Specifikacijos

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416L-CL03-ER26
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMicron Chipset
FeaturesSupermicro Certified MEM-DR416L-CL03-ER26 (MTA18ASF2G72PDZ-2G6D1)

Klausimai apie šią prekę

Should I pick the 16GB 2666MHz module or a different capacity for my Supermicro server?

This module provides 16GB at DDR4 2666MHz with CL19 latency. Choose it when your board lists PC4-21300 RDIMM support and you need a single 16GB stick.

What does the 2666MHz rating deliver once the DIMM is installed in a live server?

It runs at 2666MT/s with CL19 timing at 1.2V, giving 16GB of ECC registered bandwidth per slot.

Is the 288-pin RDIMM interface limited to a specific DDR4 speed ceiling in practice?

The 288-pin RDIMM form factor carries DDR4 2666 (PC4-21300) signals; the module itself is rated for 2666MT/s.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.