Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four chrome 90-degree G1/4 rotary adapters in a pack

Alphacool

Alphacool Eiszapfen 90° G1/4 OT-IT Chrome 4-Pack 17617

SKU CH-QYM4-JRSDR

Four chrome-plated 90° G1/4 rotary adapters with 360° adjustment for tight custom-loop routing

  • ColorChrome
  • FeaturesAlphacool's Eiszapfen connector series is the high-end execu
  • Rotatable threads allow flexible tube routing in tight spaces
  • 90° angled design simplifies loop layout around components
  • Chrome coating resists chipping and peeling over time
  • Brass construction provides durability for long-term liquid cooling use
  • Four fittings included for multiple connection points

Alphacool Eiszapfen 90° G1/4 Chrome Adaptor

This four-pack supplies chrome-plated brass 90° angle adaptors for custom liquid-cooling loops. Each fitting converts a G1/4 external thread to a G1/4 internal thread, letting builders route tubing around tight corners. Both thread ends rotate freely, so alignment is simple during assembly. The pack suits enthusiasts who need multiple angled connections in a single build.

G1/4 thread limits and 90° routing constraint

The G1/4 thread standard fixes the port diameter, so flow area cannot exceed what that thread provides. A 90° bend inherently adds restriction compared with a straight run, and the 18 mm height leaves only 5 mm of thread engagement per side. Builders who need maximum flow or minimal pressure drop should plan for fewer right-angle turns.

Rotatable dual-thread design decides fit

Both the external and internal threads rotate through 360°, allowing the adaptor to be clocked independently of the component it screws into. This single feature determines whether the fitting clears adjacent blocks, reservoirs or radiators in a crowded loop. If your layout demands fixed-angle adaptors, this part will not match that requirement.

Privalumai

  • Rotatable threads allow flexible tube routing in tight spaces
  • 90° angled design simplifies loop layout around components
  • Chrome coating resists chipping and peeling over time
  • Brass construction provides durability for long-term liquid cooling use
  • Four fittings included for multiple connection points

Specifikacijos

BrandAlphacool
Model4250197176170
ColorChrome
FeaturesAlphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!

Klausimai apie šią prekę

Should I choose the four-pack of 90° G1/4 adapters or buy single fittings?

The four-pack (17617) gives you four identical 90° G1/4 OT-IT chrome adapters in one box, which is usually cheaper per fitting than buying them individually for a custom loop.

How does the 90° angle affect flow inside my loop?

The 90° angle lets you route tubing at right angles without sharp bends, and the high-flow brass body keeps restriction low so pump performance is not noticeably reduced.

What does the rotatable G1/4 thread actually let me do?

Both the external and internal G1/4 threads rotate 360° independently, so you can clock the adapter to any orientation after tightening, eliminating alignment stress on tubing.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.