Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black mid-tower ATX case with seamless tempered glass front and side panels

Antec

Antec C5 ARGB Mid-Tower ATX PC Case

SKU CH-K75Q-4VS04 MPN C5 ARGB

Mid-tower ATX case with seamless 270-degree tempered glass, dual-chamber layout, back-connect motherboard support and seven pre-installed ARGB PWM fans

  • TypeATX Mid Tower
  • ColorBlack
  • Case MaterialSteel + Plastic + Glass
  • Motherboard CompatibilityATX (Back Connect) / Micro ATX / ATX / ITX
  • Side Panel4mm Tempered Glass
  • Dust FiltersBottom / Top

Model C5 ARGB

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

  • Panoramic 270° view through seamless tempered glass panels
  • Seven pre-installed ARGB PWM fans with six reverse blades for balanced airflow
  • Dual-chamber layout isolates the power supply with 95 mm cable space
  • Supports back-connect motherboards for cleaner front routing
  • Front USB 3.2 Gen 2 Type-C plus two USB 3.0 ports for fast peripherals

Dual-chamber ATX mid-tower

The Antec C5 ARGB is a steel-and-glass mid-tower that accepts ATX, Micro-ATX and ITX boards, including back-connect designs. A dual-chamber layout isolates the power supply in a right-hand compartment with 95mm of cable-routing space behind the motherboard tray. Seven pre-installed 120mm ARGB PWM fans — three at the bottom, three on the side as reverse-flow units and one at the rear — are driven by a built-in ARGB and PWM controller that supports up to ten fans simultaneously.

Thermals and acoustics at idle

Seamless 4mm tempered glass on the front and side uses a 45° bevel to create a 270° panoramic view with minimal joint gaps. The front panel includes an integrated ARGB strip and removes without tools. Dust filters on the top and bottom protect the interior while the seven included fans run under PWM control, allowing speed to drop at low load for quieter operation. A USB 3.2 Gen 2 Type-C port, two USB 3.0 ports and dual audio jacks sit on the front I/O.

Behaviour under sustained load

The case fits graphics cards up to 410mm long, CPU coolers up to 160mm tall and power supplies up to 240mm deep. Radiator support covers 360mm at the top and bottom, 280mm on the side and 120mm at the rear. Additional mounts accept three 120mm or two 140mm fans on the top and side, three 120mm fans on the bottom and one 120mm fan at the rear. Storage options include one 3.5-inch bay and two 2.5-inch bays behind the motherboard tray.

Privalumai

  • Panoramic 270° view through seamless tempered glass panels
  • Seven pre-installed ARGB PWM fans with six reverse blades for balanced airflow
  • Dual-chamber layout isolates the power supply with 95 mm cable space
  • Supports back-connect motherboards for cleaner front routing
  • Front USB 3.2 Gen 2 Type-C plus two USB 3.0 ports for fast peripherals

Specifikacijos

BrandAntec
ModelC5 ARGB
TypeATX Mid Tower
ColorBlack
Case MaterialSteel + Plastic + Glass
Motherboard CompatibilityATX (Back Connect) / Micro ATX / ATX / ITX
Side Panel4mm Tempered Glass
Dust FiltersBottom / Top
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Expansion Slots7
Front Ports2 x Buttons, 2 x USB 3.0, 1 x USB 3.2 Gen 2 Type-C, 2 x Audio
Fan OptionsTop: 3 x 120 / 2 x 140mm
Side: 3 x 120 / 2 x 140mm
Bottom: 3 x 120mm
Rear: 120mm
Included Fan(s): 3 x 120mm PWM ARGB reverse fans at bottom + 3 x 120mm PWM ARGB reverse fans on right side + 1 x 120mm PWM ARGB fan in rear
Pre-installed FansBottom - 3 x 120mm / Rear - 1 x 120mm / Side - 3 x 120mm
Radiator OptionsTop: 120 / 140 / 240 / 280 / 360mm
Side: 120 / 140 / 240 / 280mm
Bottom: 120 / 240 / 360mm
Rear: 120mm
Max GPU Length410 mm
Max CPU Cooler Height160 mm
Max PSU Length240 mm
Dimensions469 x 285 x 400mm (DWH)
Weight7.6 Kg
Siuntos svoris9.44 kg
Pakuotės dydis546 × 457 × 368 mm

Kiti šio modelio variantai

Dar 4 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will my 410 mm graphics card fit with a 360 mm radiator mounted at the bottom?

The case allows a maximum GPU length of 410 mm and supports a 360 mm radiator at the bottom; installing both simultaneously depends on the specific card thickness and radiator depth, so verify combined clearance before building.

Can I use a standard ATX motherboard with this dual-chamber layout?

Yes, the case supports standard ATX, Micro-ATX and Mini-ITX boards, and also accommodates back-connect ATX motherboards for cleaner cable routing in the right chamber.

How many fans can the built-in controller handle at once?

The integrated ARGB and PWM controller supports up to 10 fans simultaneously, and the case ships with seven pre-installed 120 mm ARGB PWM fans already connected.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.