Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black mid-tower ATX case with brushed front panel and dual side mesh intake, four 120mm PWM fans visible

Antec

Antec P7 S Mid-Tower ATX PC Case

SKU CH-R8GX-WRKQM MPN P7 S

Mid-tower ATX case with four pre-installed PWM fans, dual side mesh intake, 360 mm top radiator support, sound-dampening side panels and 405 mm GPU clearance

  • TypeATX Mid Tower
  • ColorBlack
  • Case MaterialSteel / Plastic
  • Motherboard CompatibilityATX / ITX / Micro ATX
  • Side PanelSteel Side Panel + Sound Dampening Foam
  • Dust FiltersBottom / Top

Options P7 S

  • Dual side mesh panels boost intake airflow for cooler components
  • Four pre-installed 120 mm PWM fans with daisy-chain control ready to use
  • Top mount supports 360 mm radiator for high-performance liquid cooling
  • Sound-dampening foam on both side panels cuts system noise
  • GPU clearance of 405 mm fits long graphics cards including RTX 50 Series

Build-Ready Mid-Tower

The Antec P7 S is a black ATX mid-tower built from steel and plastic. It accepts ATX, Micro-ATX and ITX motherboards and includes four 120 mm PWM fans pre-wired in a daisy-chain for simple speed control. Two 3.5-inch and one 2.5-inch internal drive bays provide storage flexibility for mainstream builders.

Straightforward Assembly

Seven expansion slots and a 405 mm maximum graphics-card length leave ample room for large GPUs. A 175 mm CPU-cooler height limit and 270 mm power-supply depth allowance cover most air coolers and standard ATX units. Four rubber cable grommets and three Velcro straps keep wiring tidy, while removable top and bottom dust filters simplify cleaning.

Cooling & I/O Limits

The top panel supports radiators up to 360 mm and fans up to 240 mm, while the front takes up to 240 mm and the rear a single 120 mm unit. A bottom intake with roughly 30 mm clearance enables reverse-mounted fans to blow directly on the graphics card. The front I/O includes a USB 3.2 Gen 2 Type-C port for fast external storage.

Privalumai

  • Dual side mesh panels boost intake airflow for cooler components
  • Four pre-installed 120 mm PWM fans with daisy-chain control ready to use
  • Top mount supports 360 mm radiator for high-performance liquid cooling
  • Sound-dampening foam on both side panels cuts system noise
  • GPU clearance of 405 mm fits long graphics cards including RTX 50 Series

Specifikacijos

BrandAntec
ModelP7 S
TypeATX Mid Tower
ColorBlack
Case MaterialSteel / Plastic
Motherboard CompatibilityATX / ITX / Micro ATX
Side PanelSteel Side Panel + Sound Dampening Foam
Dust FiltersBottom / Top
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Expansion Slots7
Fan OptionsIncluded Fan(s): 3 x 120mm PWM fans at the front + 1 x 120mm PWM fan at the rear
Radiator OptionsFront - Up to 120mm / Front - Up to 140mm / Front - Up to 240mm / Rear - Up to 120mm / Top - Up to 120mm / Top - Up to 240mm / Top - Up to 360mm
Max GPU Length405 mm
Max CPU Cooler Height175 mm
Max PSU Length270 mm
Dimensions18.82 x 8.74 x 18.31inch
Weight5.75kg
Siuntos svoris7.17 kg
Pakuotės dydis552 × 552 × 292 mm

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How do I confirm the 4 pre-installed 120mm PWM fans are running after I build in the P7 S?

Connect the daisy-chain cable to a motherboard PWM header, then check fan speeds in BIOS or monitoring software; all four fans should report RPM under load.

What comes in the box and what must I buy separately for the Antec P7 S?

The case includes 4 PWM fans, 4 rubber grommets, 3 Velcro straps, removable top filters and dust filters for bottom and top; you must purchase motherboard, PSU, CPU cooler, GPU, drives and any extra fans or radiators separately.

Which top radiator size should I choose for the P7 S — 120mm, 240mm or 360mm?

The top supports up to 360mm; pick 360mm for maximum liquid-cooling capacity, 240mm for a balance of performance and clearance, or 120mm if space above the motherboard is limited.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.