Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver horizontal 2U rack PDU with twelve front outlets and long black input cord

APC

APC AP7582 Basic PDU 2U 30A 200-208V 12×5-20R

SKU CH-GBWN-35RX8 MPN AP7582

Distributes 120 V power to twelve 5-20R outlets from a 30 A 200-208 V input with a 28 ft cord

  • TypeBasic
  • Rack Size2U
  • StyleRack
  • Rack Mounting KitIncludes: Installation guide, Rack Mounting brackets
  • CertificationscUL Listed, CSA C22.2 No. 107.1, UL 1778, UL Listed
  • ROHSYes
  • 12 NEMA 5-20R outlets distribute 120 V power to rack equipment
  • 30 A NEMA L14-30P input with 28 ft cord connects to a single branch whip
  • 2U horizontal form factor fits standard racks and includes mounting brackets
  • cUL and UL 1778 listed for safety compliance in commercial environments
  • 5760 VA capacity supports dense 120 V loads up to 24 A derated

2U 30A Basic Rack PDU

The APC AP7582 is a horizontal rack-mount power distribution unit that accepts 200 V, 208 V or 230 V single-phase input through a NEMA L14-30P plug on a 28 ft cord. It delivers 120 V output across twelve NEMA 5-20R receptacles with a 5760 VA capacity and includes mounting brackets and an installation guide for 2U rack spaces.

Suitable for 120 V rack equipment

This unit suits administrators who need to split one 30 A branch circuit into multiple 120 V outlets for servers, switches or peripherals inside a standard rack. It is not for environments that require metered or switched outlet control, remote monitoring, or 208 V output receptacles for higher-voltage hardware.

Input connector NEMA L14-30P

The PDU connects to a single NEMA L14-30P source rated for 30 A maximum input current and a 24 A regulatory derated limit. Verify that the facility provides this exact plug type and that the aggregate load stays within the 5760 VA output rating before installation.

Privalumai

  • 12 NEMA 5-20R outlets distribute 120 V power to rack equipment
  • 30 A NEMA L14-30P input with 28 ft cord connects to a single branch whip
  • 2U horizontal form factor fits standard racks and includes mounting brackets
  • cUL and UL 1778 listed for safety compliance in commercial environments
  • 5760 VA capacity supports dense 120 V loads up to 24 A derated

Specifikacijos

BrandAPC
ModelAP7582
TypeBasic
Rack Size2U
StyleRack
Rack Mounting KitIncludes: Installation guide, Rack Mounting brackets
CertificationscUL Listed, CSA C22.2 No. 107.1, UL 1778, UL Listed
ROHSYes
Input Voltage200V, 208V, 230V
Input Frequency50/60 Hz
Maximum Input Current30A
Regulatory Derated Input Current24A
Input Connector(s)NEMA L14-30P
Cord Length28 ft
Output Voltage120V
Output Watts (VA)5760 VA
Output Connector(s)(12) NEMA 5-20R
Operating Environment32 - 113 °F (0 - 45 °C)
Operating Relative Humidity0 - 95%
Operating Elevation0-10000 feet (0-3000 meters)
Storage Temperature13 - 149 °F (-25 - 65 °C)
Storage Relative Humidity0 - 95%
Storage Elevation0-50000 feet (0-15000 meters)
FeaturesVertical mounting capability
Horizontal mounting capability
Rack-Mountable - Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.
Single input power source - Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.
Wide range of input and output connections
Dimensions17.2" x 3.5" x 3.5"
Weight14 lbs.
Siuntos svoris8.23 kg
Pakuotės dydis533 × 533 × 165 mm

Klausimai apie šią prekę

What rack mounting hardware is included with the APC AP7582?

The unit ships with rack mounting brackets and an installation guide for horizontal 2U mounting.

What input connector does the AP7582 require, and what circuit rating is needed?

It uses a NEMA L14-30P plug and needs a 30 A branch circuit; the regulatory derated current is 24 A.

Are the 5-20R output receptacles on the AP7582 user-replaceable?

No, the twelve NEMA 5-20R outlets are fixed; if one fails the entire PDU must be replaced.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.