Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Compact grey resin 3D printer with 10.1 inch monochrome LCD screen and hinged orange cover

ApexMaker

ApexMaker Mini 14K 10.1" LCD/MSLA 3D Printer

SKU CH-XJZT-K159Q

MSLA 3D printer with a 10.1-inch 14K monochrome LCD delivering 16.8 µm XY detail and a 224 × 127 × 280 mm build volume

  • Type3D Printer
  • 1-inch 14K mono LCD delivers hair-thin 16.8 µm detail
  • 224 × 127 × 280 mm build volume fits large miniatures
  • Dual Z-axis linear rails keep layers seamless and surfaces smooth
  • Auto resin feed, tank heating and air purification run unattended
  • 8-inch touchscreen works with Chitubox, Lychee and Tango slicers

Precision 14K resin printer

The ApexMaker Mini is a 10.1 inch MSLA 3D printer with a 14K monochrome LCD delivering 13320 x 5120 pixel resolution and 16.8 µm pixel size. Its build volume measures 224 x 127 x 280 mm for detailed models. Automatic resin feeding, tank heating and an air purification system support consistent prints. A 5.8 inch touchscreen controls the unit.

Tabletop and prototype makers

Hobbyists producing miniatures, jewellery prototypes or small functional parts benefit from the high XY detail and stable dual Z-axis. Users needing larger single-part prints or filament-based FDM printing should consider other technologies. The 500 W power draw requires a suitable outlet.

16.8 µm pixel size

This XY resolution determines the finest feature the printer can reproduce. If your application demands detail at or below this scale the ApexMaker Mini matches the requirement; if coarser detail is acceptable a lower-resolution printer may suffice.

Privalumai

  • 1-inch 14K mono LCD delivers hair-thin 16.8 µm detail
  • 224 × 127 × 280 mm build volume fits large miniatures
  • Dual Z-axis linear rails keep layers seamless and surfaces smooth
  • Auto resin feed, tank heating and air purification run unattended
  • 8-inch touchscreen works with Chitubox, Lychee and Tango slicers

Specifikacijos

Type3D Printer

Klausimai apie šią prekę

Will the 224 x 127 x 280 mm build volume fit on my existing wash-and-cure station?

The build platform measures 224 mm wide by 127 mm deep, so compare those dimensions with your station's basket size before buying.

How can I confirm the 16.8 µm XY resolution is delivering the detail shown in the specs?

Print a calibration model with fine features; the 10.1 inch 14K mono screen should resolve hair-thin details at the stated 16.8 µm pixel pitch.

Does the box include resin or a wash-and-cure unit, or must I buy them separately?

The printer ships with the 10.1 inch 14K mono screen, automatic resin feeding, heated vat and touchscreen; UV resin and post-processing hardware are sold separately.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.