Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four soft grey thermal pads 120 by 20 mm 1.5 mm thick

ARCTIC

ARCTIC TP-4 Thermal Pad 120x20mm 1.5mm 4 pcs

SKU CH-C86A-41TDA

Soft thermal pads fill gaps on RAM, chipsets and GPUs to minimise thermal resistance and dampen vibration

  • High performance for RAM, GPUs and consoles
  • Extremely soft 1.5 mm pad bridges uneven surfaces
  • Flexible material dampens vibration on electronic components
  • Easy to cut 120 x 20 mm sheets for custom fit
  • Stackable without performance loss for thicker gaps

Ideal for RAM, chipsets, GPUs and consoles

The ARCTIC TP-4 thermal pad is a high-performance thermal interface material designed for memory modules, chipsets, graphics cards, consoles and laptops. It bridges uneven surfaces with an extremely soft, flexible texture that also dampens vibration. The material is easy to cut to the exact shape required for each application.

1.5 mm thickness in 120 x 20 mm sheets

The single specification that determines fit is the 1.5 mm thickness combined with the 120 x 20 mm sheet dimensions. Each pack contains four pieces that can be stacked without performance loss if a larger gap must be filled. Verify the exact gap height and surface area of your component before ordering.

Low thermal resistance and safe handling

The pad minimises thermal resistance to move heat away from the component efficiently. It is non-conductive and non-capacitive, so accidental contact with surrounding circuitry poses no electrical risk. The soft compound conforms under light pressure, ensuring consistent contact without pumping out over time.

Privalumai

  • High performance for RAM, GPUs and consoles
  • Extremely soft 1.5 mm pad bridges uneven surfaces
  • Flexible material dampens vibration on electronic components
  • Easy to cut 120 x 20 mm sheets for custom fit
  • Stackable without performance loss for thicker gaps

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How does the 1.5 mm thickness perform once installed between a GPU die and its cooler?

The 1.5 mm pad compresses to fill microscopic gaps, lowering thermal resistance and allowing heat to move efficiently from the die to the heatsink.

What interface standard governs how this pad mates with the component surface?

There is no electrical interface; the pad relies on its extremely soft silicone construction to conform to uneven surfaces and maintain continuous physical contact.

Will the 120 x 20 mm pieces fit a laptop GPU shim without further cutting?

Each piece measures 120 mm by 20 mm, so you can trim the pad to match the exact shim outline using scissors or a craft knife.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.