Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black 40mm square case fan, 20mm thick, 3-pin connector, no LED

Athena Power

Athena Power FANC-4020BW3H 40mm 20mm case fan

SKU CH-6KCG-TS2F2

Compact 40mm case fan with ball bearing, 3-pin power, 7000 RPM airflow of 10-15 CFM at 25-30 dBA

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size40mm
  • Fan Thickness20mm
  • Compact 40 mm × 20 mm profile fits tight IPC chassis
  • Ball bearing rated for continuous high-speed operation
  • 7000+ RPM delivers 10 to 15 CFM airflow
  • 25 to 30 dBA keeps noise low in dense builds
  • CE and UL certified for industrial safety compliance

Compact 40mm chassis fan

The Athena Power FANC-4020BW3H is a 40mm by 20mm case fan built for industrial PC chassis where space is tight. It uses a ball bearing and a 3-pin power connector to deliver 10 to 15 CFM of airflow at speeds above 7000 RPM. The black plastic frame carries CE and UL certification for safety compliance.

Straightforward 3-pin mounting

Installation consists of aligning the 40mm square frame with the chassis mounting holes and plugging the 3-pin connector into a compatible header. The supplied hardware in the complete package secures the fan without extra tools. Misaligned screw holes or a header that only accepts 4-pin PWM control are the typical reasons a builder has to re-seat the unit.

Steady airflow under load

At sustained speeds above 7000 RPM the fan maintains its rated 10 to 15 CFM flow while noise stays between 25 and 30 dBA. The ball bearing is designed for continuous operation without the slowdown that sleeve bearings can exhibit after prolonged heat exposure. The air-cooled plastic construction resists deformation during extended duty cycles.

Privalumai

  • Compact 40 mm × 20 mm profile fits tight IPC chassis
  • Ball bearing rated for continuous high-speed operation
  • 7000+ RPM delivers 10 to 15 CFM airflow
  • 25 to 30 dBA keeps noise low in dense builds
  • CE and UL certified for industrial safety compliance

Specifikacijos

BrandAthena Power
ModelFANC-4020BW3H
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size40mm
Fan Thickness20mm
Bearing TypeBall
RPM>7000 RPM
Air Flow10-15 CFM
Noise Level25 - 30 dBA
Power Connector3 Pin
ColorBlack
LEDNo
Dimensions40x40x20mm

Klausimai apie šią prekę

How can I confirm the FANC-4020BW3H is spinning correctly after installation?

Listen for the ball-bearing whir and check that your BIOS or monitoring software reports a speed above 7000 RPM with noise between 25 and 30 dBA.

What comes in the box and what must I supply myself?

The package includes the single 40 mm by 20 mm black fan with a 3-pin connector; you only need a compatible motherboard header or fan controller.

Which version of this fan should I choose for my build?

This model is offered in one configuration — 40 mm frame, 20 mm thickness, ball bearing, 3-pin power, no LED — so select it when those exact specifications match your chassis.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.