Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Rectangular metal power supply, grey finish, IP67 rated, 6.85 by 1.98 by .43 inches

BONAEVER

BONAEVER LED Power Supply 200W 12V IP67

SKU CH-8H3V-HJ49S

A 200 W, 12 V DC driver with IP67 waterproofing and short-circuit, overload, over-voltage and over-temperature protection for outdoor LED strips and lighting

  • TypePower Supply
  • Delivers 200 W at 12 V DC with 16.67 A output for high-power LED installations
  • IP67 rating and dual-shell design protect against dust and water for reliable outdoor use
  • Automatic protection against short circuit, overload, over-voltage and over-temperature with hiccup recovery
  • Operates from AC 90–150 V at 47–63 Hz with ≥85 % efficiency for stable power
  • Wide -40 °C to 40 °C working range and 20–95 % humidity tolerance suit harsh environments

12 V 200 W LED Driver

This is a new 12 V DC constant-voltage LED driver rated at 200 W and 16.67 A. It accepts an AC input between 90 and 150 V at 47 to 63 Hz and delivers typical efficiency of at least 85 percent. The unit is intended for outdoor and indoor lighting installations that require a sealed power source.

IP67 Sealed Enclosure

The housing meets IP67 dust and water ingress protection, using dual-shell construction for waterproofing and heat dissipation. It operates from minus 40 to plus 40 degrees Celsius and tolerates 20 to 95 percent relative humidity. Automatic protection covers short circuit, overload, over-voltage and over-temperature faults with hiccup-mode recovery.

Wiring and Mounting

Input leads are 3.3 ft long and output leads are 8.66 in long. The enclosure measures 6.85 by 1.98 by 0.43 in, allowing surface mounting in tight spaces such as signage, architectural lighting or bridge railing. It is not suitable for loads that exceed 200 W or for non-12 V DC applications.

Privalumai

  • Delivers 200 W at 12 V DC with 16.67 A output for high-power LED installations
  • IP67 rating and dual-shell design protect against dust and water for reliable outdoor use
  • Automatic protection against short circuit, overload, over-voltage and over-temperature with hiccup recovery
  • Operates from AC 90–150 V at 47–63 Hz with ≥85 % efficiency for stable power
  • Wide -40 °C to 40 °C working range and 20–95 % humidity tolerance suit harsh environments

Specifikacijos

TypePower Supply

Klausimai apie šią prekę

What does the 200 W rating mean for my LED installation?

It delivers up to 16.67 A at 12 V DC, so you can run LED strips or fixtures totalling no more than 200 watts.

What does the IP67 rating allow in practice?

The sealed housing is dust-tight and withstands temporary immersion, making it suitable for permanent outdoor mounting.

Will the 6.85 × 1.98 × 0.43 in case fit in my enclosure?

The slim aluminium profile measures 6.85 inches long, 1.98 inches wide and 0.43 inches thick, with 3.3 ft input leads and 8.66 in output leads.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.