Brute Networks
Brute Networks 16GB DDR4-2666 2Rx8 1.20V 260-Pin SO-DIMM server RAM
16GB DDR4-2666 ECC SO-DIMM for HP servers, 1.2V 2Rx8 validated compatible
- Capacity16GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2666 (PC4 21300)
- Voltage1.20V
- ECCYes
- Rank2Rx8
- 16 GB capacity supports larger workloads in compatible servers
- DDR4-2666 speed rated at PC4-21300 for standard throughput
- ECC protection detects and corrects single-bit memory errors
- 2Rx8 dual-rank organisation increases memory density per slot
- 20 V low-voltage operation reduces power draw per module
HP Compatible 16GB DDR4 SO-DIMM
This 16GB DDR4-2666 SO-DIMM operates at 1.20V with ECC and a 2Rx8 organisation. It is built for HP servers that accept 260-pin DDR4 modules and carries the equivalent HP part number 3TQ38AT. The memory uses major-brand chips from Samsung, SK Hynix or Micron and is validated for full compatibility.
Suited for HP servers needing ECC SO-DIMMs
This module fits HP systems that require PC4-21300 DDR4-2666 ECC memory in a 260-pin SO-DIMM form factor. It is not suited for laptops or desktops that require non-ECC memory, nor for platforms that do not support DDR4 SO-DIMM ECC modules. Builders needing a different capacity, voltage or rank configuration should look elsewhere.
PC4-21300 DDR4-2666 ECC specification
The decisive specification is the PC4-21300 DDR4-2666 ECC 2Rx8 1.20V 260-pin SO-DIMM standard. Only systems whose memory controller and BIOS support this exact combination will recognise and run the module correctly. Verify the server's qualified-vendor list or service manual for this part number before ordering.
Privalumai
- 16 GB capacity supports larger workloads in compatible servers
- DDR4-2666 speed rated at PC4-21300 for standard throughput
- ECC protection detects and corrects single-bit memory errors
- 2Rx8 dual-rank organisation increases memory density per slot
- 20 V low-voltage operation reduces power draw per module
Specifikacijos
| Brand | HP |
|---|---|
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| Voltage | 1.20V |
| ECC | Yes |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Klausimai apie šią prekę
What server slot does this 260-pin DDR4 SO-DIMM require?
This module fits a DDR4 260-pin SO-DIMM slot running at 1.20 V; the motherboard must support DDR4 ECC memory at 2666 MT/s.
Can I mix this 2Rx8 ECC stick with my existing 1Rx8 DDR4-2666 modules?
Mixing ranks is often allowed, but the server must support 2Rx8 density and ECC; population rules vary by platform, so check the system manual before adding it.
How do I verify the module runs at 2666 MT/s with ECC active after installation?
Enter BIOS or use a tool such as dmidecode; confirm Speed shows 2666 MT/s, Type shows DDR4, and Error Correction shows ECC enabled.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



