Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver 3.5-inch hard drive module with front label and handle

Buffalo Technology

Buffalo Technology OP-HD10.0N 10TB rackmount NAS

SKU CH-AD4E-EBKWX MPN OP-HD10.0N

10 TB replacement drive for compatible TeraStation rackmount NAS units

  • Included HDD Capacity10TB
  • Dimensions1.03" x 4.00" x 5.79"
  • Weight1.63 lbs.
  • 10TB capacity for large storage arrays
  • Compatible with TeraStation 5010, 3010, 3020, WS5020, 6400 series
  • Slim 1.03" height fits standard rack bays
  • Lightweight 1.63 lbs design eases installation
  • New replacement drive ready for immediate deployment

Replacement drive for TeraStation arrays

The Buffalo Technology OP-HD10.0N is a 10TB rackmount NAS hard drive built as a direct replacement for specific TeraStation models. It targets administrators who need to restore capacity or swap a failed disk in supported units without changing firmware or cabling.

Upgrades capacity in 5010 3010 3020 WS5020 6400

This drive replaces smaller factory-installed disks in the listed TeraStation series. The jump is worth it when an array has hit its storage ceiling and the chassis cannot accept additional bays. It is not suited for non-TeraStation servers or for builders who need hot-spare flexibility across mixed hardware.

Slide-in installation with RAID rebuild

The drive fits the standard carrier used by the compatible TeraStation models, so installation is a simple slide-and-lock action. The main risk is inserting a single disk into a degraded RAID set without verifying the array health first, which can trigger a lengthy rebuild and leave the volume unprotected until it finishes.

Privalumai

  • 10TB capacity for large storage arrays
  • Compatible with TeraStation 5010, 3010, 3020, WS5020, 6400 series
  • Slim 1.03" height fits standard rack bays
  • Lightweight 1.63 lbs design eases installation
  • New replacement drive ready for immediate deployment

Specifikacijos

BrandBUFFALO
ModelOP-HD10.0N
Included HDD Capacity10TB
Dimensions1.03" x 4.00" x 5.79"
Weight1.63 lbs.
Siuntos svoris0.91 kg
Pakuotės dydis196 × 152 × 51 mm

Klausimai apie šią prekę

Will the 1.03" x 4.00" x 5.79" drive tray slide into a TeraStation 5010, 3010, 3020, WS5020 or 6400 series bay?

Yes, the OP-HD10.0N is built to the exact 1.03 by 4.00 by 5.79 inch form factor required by those TeraStation models, so it seats directly in the hot-swap bay.

What is the correct way to seat the 1.63 lb drive module in the rackmount chassis?

Hold the module by its edges, line up the guide rails with the bay, slide it in until the front face is flush, then engage the locking lever to secure the 10 TB unit.

When should the 10 TB replacement drive be swapped out in a RAID array?

Replace the OP-HD10.0N immediately if the TeraStation reports a SMART error, a degraded RAID status, or after the drive reaches the manufacturer-rated workload limit.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.