Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver rotary elbow fitting with G 1/4 male and female threads at 90 degree angle

Bykski

Bykski G 1/4 Male-Female 90° Rotary Elbow Fitting Silver

SKU CH-SAVJ-MDMV7

Connects G 1/4 threads at a 90-degree angle with a rotary joint for flexible tubing routing in non-aluminium liquid-cooling loops

  • TypeCPU Block
  • ColorSilver
  • G 1/4 threads integrate directly into standard water-cooling loops
  • Rotary 90° elbow lets you aim the outlet in any direction
  • Male-to-female design redirects tubing runs away from tight component clearances
  • Brass construction resists corrosion in non-aluminum coolant loops
  • Silver finish matches common fitting aesthetics for a uniform look

Bykski G 1/4 Rotary Elbow

The Bykski G 1/4 male-to-female 90-degree rotary elbow fitting redirects a custom liquid-cooling loop at a right angle. Its rotating joint lets you orient the outlet in any direction without stressing tubing or components. The brass construction with a silver finish suits non-aluminum loops. One fitting is included.

Suits tight routing in custom loops

Builders who need to turn tubing sharply around motherboards, graphics cards or radiators will find this adapter useful. It is not intended for loops that require straight-through couplers or angled connections other than 90 degrees. The G 1/4 thread limits use to components sharing that thread standard. The fitting is incompatible with aluminium-based cooling parts.

G 1/4 thread compatibility decides fit

The single specification that determines whether this part works is the G 1/4 thread on both male and female ends. Every block, radiator, pump, reservoir and tube fitting in the loop must use the same thread standard. Verify the thread on all mating components before purchase.

Privalumai

  • G 1/4 threads integrate directly into standard water-cooling loops
  • Rotary 90° elbow lets you aim the outlet in any direction
  • Male-to-female design redirects tubing runs away from tight component clearances
  • Brass construction resists corrosion in non-aluminum coolant loops
  • Silver finish matches common fitting aesthetics for a uniform look

Specifikacijos

TypeCPU Block
ColorSilver

Klausimai apie šią prekę

Will the G 1/4 rotary elbow need its O-ring replaced during loop maintenance?

The brass fitting uses a standard G 1/4 thread seal; inspect the O-ring whenever the loop is drained and replace it if it shows flattening or cracking.

What is the first flow restriction I will hit when running coolant through this 90 degree rotary elbow all day?

The sharp 90 degree turn inside the elbow creates the primary pressure drop, so pump head must overcome that bend before any other component.

How much heat does the brass rotary elbow add to the coolant during continuous operation?

The brass body quickly reaches fluid temperature and adds no measurable heat of its own; only the pump and components warm the loop.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.