Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two black sleeved Y-cables each splitting one 4-pin header into three fan connectors

Corn Electronics

Corn Electronics 2-Pack 3-Way 4-Pin PWM Fan Splitter Cable 12 Inches

SKU CH-Z43X-Z61DC

Connect three PWM or 3-pin case fans to one motherboard header with this 12-inch sleeved splitter cable, rated for 36 watts total power

  • TypeCase Fan
  • Connect three fans to one motherboard header
  • 12-inch sleeved cables keep routing tidy
  • Master connector passes PWM signal to all fans
  • 36-watt rating supports high-power fan sets
  • Two splitter cables included for multi-fan builds

2-Pack 3-Way 4-Pin PWM Fan Splitter

This 2-pack of 3-way 4-pin PWM fan splitter cables connects three case fans to a single motherboard fan header. Each 12-inch cable splits one 4-pin header into three fan connections for simplified cable routing. The sleeved jacket resists tangles and keeps the interior tidy. It is suited for builders expanding case airflow without adding a dedicated fan controller.

For builders using PWM fans on a PWM header

These splitters suit systems where the motherboard header supports PWM control and can supply enough current for three fans. The master 4-pin connector reports RPM to the board while the two 3-pin branches follow the same speed signal. Builders whose boards lack PWM headers or whose fans draw more than the header can safely provide should look at a powered fan hub instead.

36-watt maximum power rating

The cable assembly is rated for a total draw of 36 watts across all three connected fans. Exceeding this limit risks overheating the splitter or the motherboard header. Verify the combined wattage of your fans before installation to ensure the splitter remains within its rated capacity.

Privalumai

  • Connect three fans to one motherboard header
  • 12-inch sleeved cables keep routing tidy
  • Master connector passes PWM signal to all fans
  • 36-watt rating supports high-power fan sets
  • Two splitter cables included for multi-fan builds

Specifikacijos

TypeCase Fan

Klausimai apie šią prekę

How much space does the 12-inch cable need inside the case?

Each splitter is 12 inches long with a sleeved jacket; allow enough clearance for the master 4-pin connector at the motherboard header and the three fan branches to reach their mounts without tension.

Which fan header pin carries the PWM signal during installation?

The master 4-pin connector receives the PWM control signal from the motherboard and distributes it to all three fans; the two 3-pin branches run at the same speed as the master fan when the board supports PWM control.

When should the splitter be replaced?

Replace the cable if the sleeving frays, connectors become loose, or total fan draw approaches the 36-watt limit, as overheating can damage the motherboard header.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.