Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Full-tower case with Jujutsu Kaisen artwork on tempered glass side panels

Corn Electronics

Corn Electronics GR701 E-ATX PC case Jujutsu Kaisen edition

SKU CH-V5EQ-JMDH4

Full-tower chassis with dual 420 mm radiator mounts, four pre-installed 140 mm PWM fans, metal GPU holder and 60 W fast-charge USB-C

  • TypeATX Full Tower

Options Jujutsu Kaisen

Rodyti 48 daugiau konfigūracijų

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

  • E-ATX motherboard support up to 12 x 10.9 inches
  • Dual 420 mm radiator mounts front and top
  • Four pre-installed 140 mm PWM fans included
  • Metal GPU holder supports cards up to 460 mm
  • Front USB 4.0 Type-C with 60 W fast charging

Jujutsu Kaisen E-ATX Full Tower

The Corn Electronics GR701 is a full-tower chassis built for E-ATX, ATX, Micro-ATX and Mini-ITX motherboards. It arrives with four pre-installed 140 mm PWM fans and a metal GPU holder to support cards up to 460 mm long. Dual tempered-glass panels display the custom UV-printed artwork.

Suits high-airflow custom loops.

Builders planning dual 420 mm radiators — one front, one top — will find native support without modification. The 34 mm cable-routing channel and removable dust filters simplify maintenance. Small-form-factor systems or desks with limited depth should consider a narrower case.

420 mm dual-radiator clearance

Front and top mounts each accept radiators up to 420 mm, while the rear takes 120 mm or 140 mm units. This specification decides whether a dual-loop or heavy single-loop cooling plan fits inside the 268 x 639 x 659 mm footprint.

Privalumai

  • E-ATX motherboard support up to 12 x 10.9 inches
  • Dual 420 mm radiator mounts front and top
  • Four pre-installed 140 mm PWM fans included
  • Metal GPU holder supports cards up to 460 mm
  • Front USB 4.0 Type-C with 60 W fast charging

Specifikacijos

Modelinternational version
TypeATX Full Tower

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How loud and hot does the GR701 run with its four 140 mm PWM fans spinning all day?

Four 140 mm PWM fans are pre-installed, three at the front and one at the rear, giving high airflow at lower RPM for quieter operation.

Which motherboard and power supply do I need to already own for this E-ATX case?

It fits E-ATX boards up to 12 by 10.9 inches, plus ATX, Micro-ATX and Mini-ITX, and accepts PSUs up to 240 mm long.

Will my existing 360 mm radiator and 460 mm graphics card still fit inside the GR701?

Front and top both support radiators up to 420 mm, so a 360 mm unit fits, and the GPU clearance is 460 mm for long cards.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.