Corn Electronics MOD3 ATX Full Tower PC Case
- ATX Full Tower
- Micro ATX / ATX / E…
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Corn Electronics
Full-tower aluminium-and-glass chassis supporting EATX boards, 400 mm graphics cards, 360 mm radiators and three 2.5″ or one 3.5″ drive
The MOD3 uses 2.5mm and 2.0mm aluminium-magnesium plates with double-sided sand-blasted anodising plus a 4.0mm tempered-glass side panel. The combined structure weighs 8kg and measures 232mm wide, 647mm deep and 620mm high. An open-frame layout gives direct access to components for maintenance or show builds.
Internal storage fits one 3.5-inch drive plus two 2.5-inch drives, or three 2.5-inch drives in the alternative layout. The front panel provides two USB 3.0 ports and separate audio and microphone jacks. Seven expansion slots support full-length graphics cards up to 400mm.
Maximum CPU cooler height is 170mm and power-supply length is limited to 195mm. Radiator mounts at the top and front accept 120mm, 240mm or 360mm units with optional 120mm fans. Buyers needing more than one 3.5-inch bay or a longer power supply should check alternative cases.
| Model | MOD3 |
|---|---|
| Type | ATX Full Tower |
| Motherboard Compatibility | Micro ATX / ATX / Extended ATX |
| Side Panel | with Side Window |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 3 |
| Expansion Slots | 7 |
| Front Ports | USB3.0*2/AUDIO*1/MIC*1 |
| Fan Options | Top: 3×120mm Fan Front:3×120mm Fan |
| Radiator Options | 360/240/120 |
| Max GPU Length | 400mm |
| Max CPU Cooler Height | 170mm |
| Max PSU Length | ATX(195mm) |
| Dimensions | 232MM (W) * 647MM (D) * 620MM (H) |
| Weight | 8KG |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
The front I/O provides two USB 3.0 ports; they operate at the standard 3.0 rate when connected to a 3.0 header on the motherboard.
The case accepts GPUs up to 400 mm long and CPU coolers up to 170 mm tall; the 232 mm internal width accommodates both without interference.
Fit the EATX standoffs supplied with the case into the matching threaded holes, then secure the board with the included M3 screws before adding any drives or radiators.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?