SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
DELL
A 2.5-inch SAS hard drive with 1.2TB capacity and 10000 RPM spindle speed for fast data access
This new Dell 400-AJQD hard drive provides 1.2TB of storage in a 2.5-inch form factor. It operates at 10000 RPM and connects via a SAS 12Gb/s interface for fast data access. The drive is designed to increase the storage capacity of compatible systems.
This drive suits administrators adding high-speed capacity to systems equipped with SAS 12Gb/s backplanes or controllers. The 10000 RPM spindle speed supports demanding read and write workloads. Builders whose chassis only accept 3.5-inch bays or who require a different interface should look at other options.
The single specification that determines compatibility is the SAS 12Gb/s interface. The host system must provide a matching SAS connector and controller support. Without that specific interface the drive cannot be installed or used.
| Brand | Dell |
|---|---|
| Model | 400-AJQD |
| Interface | SAS 12Gb/s |
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Features | Increase the storage capacity of your system with the 1.2TB Hard Drive from Dell. Offering a rotational speed of 10K RPM, this drive provides fast disk access. Featuring SAS interface, this hard drive delivers enhanced data transfer speeds. Offers - 1.2TB capacity to store large amount of data SAS interface delivers high data transfer speeds 10K RPM spindle speed ensures excellent performance |
| Form Factor | 2.5" |
Mount the 2.5" drive in a 3.5" adapter bracket, connect the SAS data and power cables, then ensure the backplane or controller is set to 12Gb/s mode — many forget to enable the higher link speed.
The 10000 RPM spindle bearings are the primary wear item; plan to replace the drive after the rated annualised failure rate period or when SMART reallocated-sector counts rise.
The 10000 RPM mechanical latency and 12Gb/s interface ceiling bound sustained throughput; the drive hits its maximum sequential transfer rate before thermal throttling engages.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?