DELL
DELL GKWHP 8TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive
An 8 TB desktop hard drive with a 3.5" form factor, SAS interface and 7200 RPM spindle speed
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity8TB
- RPM7200 RPM
- Average Latency12Gb/s
- Form Factor3.5"
- 8 TB capacity stores large data sets
- 7200 RPM spindle delivers responsive throughput
- SAS 12 Gb/s interface enables fast transfers
- 5 inch form factor fits standard bays
- Hot-swap tray allows drive changes without downtime
Dell GKWHP 8 TB SAS drive
The Dell GKWHP is a 3.5-inch internal hard drive with an 8 TB capacity. It uses a SAS 12 Gb/s interface and spins at 7200 RPM. The drive is supplied as a bare unit with hot-swap tray support. It is designed for nearline storage in compatible Dell systems.
Suits arrays needing high-capacity SAS spindles
This drive fits administrators expanding nearline storage pools that accept 12 Gb/s SAS connections. It is not for systems limited to lower SAS link speeds or 2.5-inch bays. It is also not for workloads requiring solid-state latency or higher rotational speeds.
SAS 12 Gb/s interface
The single specification that decides compatibility is the 12 Gb/s SAS interface. The host controller and backplane must support this exact link rate to realise the rated transfer performance. Without it, the drive will not operate at its intended speed.
Privalumai
- 8 TB capacity stores large data sets
- 7200 RPM spindle delivers responsive throughput
- SAS 12 Gb/s interface enables fast transfers
- 5 inch form factor fits standard bays
- Hot-swap tray allows drive changes without downtime
Specifikacijos
| Brand | Dell |
|---|---|
| Model | GKWHP |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Average Latency | 12Gb/s |
| Form Factor | 3.5" |
Klausimai apie šią prekę
How do I install the GKWHP drive in a hot-swap bay?
Slide the bare drive into a compatible 3.5" SAS hot-swap tray until the connector seats, then lock the lever; the SAS 12Gb/s link negotiates automatically.
What maintenance or replacement will the GKWHP drive need over time?
As a mechanical 7200 RPM nearline HDD, plan to replace it once SMART reallocated-sector counts rise or after the rated annualised workload limit is reached.
Which limit appears first during sustained writes on the GKWHP drive?
The 12Gb/s SAS interface caps burst throughput, while the 7.2K platters set the steady-state sequential ceiling under continuous load.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
