Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver 3.5 inch SATA hard drive with hot-plug tray

DELL

DELL WD4000FYYZ 4TB SATA 3.5" 7.2k 6Gbps Hot Plug Gen 14 internal hard drive

SKU CH-MDPY-GXEX1 MPN WD4000FYYZ

4 TB SATA 3.5-inch 7.2k RPM hot-plug drive for Gen 14 Dell PowerEdge servers

  • 4 TB capacity stores large datasets and backups
  • 2 k RPM spindle speed delivers steady throughput for bulk workloads
  • SATA 6 Gb/s interface provides compatible connectivity for Gen 14 servers
  • Hot-plug design allows drive replacement without system downtime
  • Broad Dell server compatibility covers R240 through R960 and C-series platforms

Dell 4 TB SATA hard drive

This Dell WD4000FYYZ is a 3.5-inch internal hard drive with a 4 TB capacity and a SATA 6Gb/s interface. It spins at 7.2k RPM and supports hot-plug installation. The drive is designed for compatible Dell PowerEdge servers and Precision workstations. It suits administrators expanding storage arrays in supported Gen 14 platforms.

Capacity and workload fit

The 4 TB capacity provides space for operating-system volumes, application data and near-line archives. Sequential throughput suits backup targets and bulk file repositories. Random I/O performance will limit transactional databases or virtual-machine clusters that demand high IOPS. Workloads exceeding sustained write bandwidth should evaluate faster media.

Build and daily implications

The hot-plug carrier allows drive replacement without powering down the chassis, reducing service windows in rack-mounted servers. A SATA data and power connector is the only interface; no additional cabling or adapters are required. The 3.5-inch form factor fits standard drive bays in the listed Dell systems. Firmware is validated for the supported server models.

Privalumai

  • 4 TB capacity stores large datasets and backups
  • 2 k RPM spindle speed delivers steady throughput for bulk workloads
  • SATA 6 Gb/s interface provides compatible connectivity for Gen 14 servers
  • Hot-plug design allows drive replacement without system downtime
  • Broad Dell server compatibility covers R240 through R960 and C-series platforms

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Will the 6 Gb/s SATA interface work with my existing 3 Gb/s SATA backplane?

The drive supports 6 Gb/s SATA and is backward compatible with 3 Gb/s SATA controllers, so it will operate at the lower speed on older backplanes.

How can I confirm the 7.2 k RPM drive is running correctly after installation?

Check the server BIOS or RAID controller for the WD4000FYYZ model, 4 TB capacity and 7.2 k RPM speed, then run a SMART self-test to verify health.

Does the hot-plug tray ship with the drive or must I order it separately?

The product is supplied as the bare 3.5" drive only; the hot-plug carrier tray for Dell Gen 14 servers is not included and must be purchased separately.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.