Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small green circuit board with 12+6 pin and 22 pin SATA connectors

EN-Labs

EN-Labs A1370 MacBook Air 2010-2011 12+6pin to SATA 22pin adapter

SKU CH-66KK-7Z1ZZ MPN A1370

Converts 12+6 pin MacBook Air SSDs from 2010-2011 models to standard 22-pin SATA without altering performance

  • FeaturesOnly support for Apple Macbook 2010 2011 Support Macbook Air
  • Upgrade MacBook Air storage using standard SATA drives
  • Compatible with 2010 models A1370 A1369 MC503 MC504 MC505 MC506
  • Compatible with 2011 models A1370 A1369 MC965 MC966 MC968 MC969
  • Converts proprietary 12+6pin SSD to 22 pin SATA interface
  • Preserves original SSD speed and properties during conversion

MacBook Air 2010-2011 SSD adapter

This EN-Labs A1370 adapter converts the proprietary 12+6pin SSD found in MacBook Air models from 2010 and 2011 to a standard 22-pin SATA interface. It supports A1370 and A1369 chassis with model numbers MC503, MC504, MC505, MC506, MC965, MC966, MC968 and MC969. The board performs only a physical connection change.

Passive form-factor conversion

The adapter contains no active controller, so sustained data rates match the original drive and host bus without added latency or throttling. Performance under continuous load is identical to a direct SSD connection because the circuit simply reroutes signals. No firmware or driver is required for operation.

No added power or cooling needs

As a passive bridge board it draws no extra power and generates no measurable heat beyond the SSD itself. The compact PCB adds no audible noise and fits inside the MacBook Air without modifying the chassis. Verify the 12+6pin contact layout before installation.

Privalumai

  • Upgrade MacBook Air storage using standard SATA drives
  • Compatible with 2010 models A1370 A1369 MC503 MC504 MC505 MC506
  • Compatible with 2011 models A1370 A1369 MC965 MC966 MC968 MC969
  • Converts proprietary 12+6pin SSD to 22 pin SATA interface
  • Preserves original SSD speed and properties during conversion

Specifikacijos

BrandEN-Labs
ModelMACSSD2SATA2011
FeaturesOnly support for Apple Macbook 2010 2011 Support Macbook Air 2010 Model A1370 A1369 MC503 MC504 MC505 MC506 Suport Macbook Air 2011 Molde A1370 A1369 MC968 MC969 MC965 MC966 The Macbook SSD must be 12+6pin contacts. Convert the Macbook Air SSD to Standard 22 Pin SATA port. The speed and other properties is not changed, only form conversion interface.

Klausimai apie šią prekę

Will the EN-Labs A1370 adapter draw extra power or generate heat when used continuously?

The adapter is a passive bridge card with no active components, so it adds no measurable power draw or heat during all-day operation.

What existing hardware must I own for this 12+6pin to 22pin SATA adapter to function?

You need a MacBook Air 2010 (A1370, A1369, MC503-506) or 2011 (A1370, A1369, MC965-969) with a 12+6pin SSD, plus a standard 22-pin SATA cable and host device.

Can I connect the converted SSD to an older Mac that only has a SATA interface?

Yes, the adapter presents a standard 22-pin SATA connection, so the SSD works with any system that accepts a regular SATA drive.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.