Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Aqua blue duplex multimode fiber patch cable with SC connectors on both ends, 3.0 mm jacket, 5 metre length

Enfain

Enfain OM3 SC-SC Duplex Multimode Fiber Patch Cable 5m Aqua Blue

SKU CH-NS10-3AY91

OM3 multimode duplex cable with SC connectors, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical loss and >38 dB return loss for 10 Gbit links

Length 5m

  • Supports 10G 40G networks with OM3 10-gigabit core
  • Low signal loss at typical .2dB maximum .3dB insertion loss
  • High return loss exceeds 38dB for reliable data integrity
  • Durable 3.0mm PVC jacket withstands 1000 mating cycles
  • Operates from minus 20°C to 60°C with 330mm bend radius

OM3 SC-SC Duplex Fiber Patch Cable

This 5-metre aqua-blue patch cable uses OM3 multimode fibre with SC connectors on both ends. It is built for 10-gigabit links in switches, servers and data-centre equipment. The 3.0 mm PVC jacket protects the duplex fibres in standard rack and patch-panel installations.

Installation notes and common issues

The ceramic ferrules and SC push-pull connectors allow quick mating without tools. Typical insertion loss is 0.2 dB and maximum insertion loss is 0.3 dB, while return loss exceeds 38 dB. Ensure end-faces are clean before connecting; contaminated ferrules are the main cause of excess loss. The cable withstands 1000 mating cycles and a minimum bend radius of 330 mm.

Pre-order checklist

Verify that both devices present SC ports and support 850 nm multimode transmission. Confirm the link budget can accommodate the stated insertion-loss figures. Check that the operating temperature range of -20 °C to +60 °C matches the deployment environment. Ensure the 5-metre length reaches between the patch panel and the active equipment without exceeding the minimum bend radius.

Privalumai

  • Supports 10G 40G networks with OM3 10-gigabit core
  • Low signal loss at typical .2dB maximum .3dB insertion loss
  • High return loss exceeds 38dB for reliable data integrity
  • Durable 3.0mm PVC jacket withstands 1000 mating cycles
  • Operates from minus 20°C to 60°C with 330mm bend radius

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How can I confirm the 5 m OM3 patch cord is performing within spec after installation?

Measure insertion loss at 850 nm with a light source and power meter; a reading of .2 dB typical or .3 dB maximum and return loss above 38 dB indicates the link meets the published figures.

What connectors, jacket and ferrules are supplied, and what must I provide separately?

The cable arrives with duplex SC connectors, ceramic ferrules and a 3.0 mm PVC jacket; you only need compatible SC ports on your switch, server or patch panel — no extra parts are included.

Which OM3 duplex SC-SC length should I select for a 10 GbE run between two racks?

Choose the 5 m version when the patch-panel-to-patch-panel distance is roughly five metres; the OM3 10-gigabit core supports 1 G, 10 G and 40 G Ethernet at 850 nm over that span.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.