Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Compact silver liquid-cooling block with attached fan and wiring

Fans

Fans DIY TEC Peltier semiconductor refrigerator liquid cooler

SKU CH-4TEP-0AVGD

A DIY Peltier semiconductor liquid cooling module for custom refrigeration projects

  • TEC Peltier module provides active sub-ambient cooling
  • Liquid-cooling loop efficiently transfers heat away from CPU
  • DIY kit enables custom refrigeration system builds
  • Integrated fan assists radiator heat dissipation

DIY Peltier semiconductor cooler

This DIY kit uses a thermoelectric Peltier module to provide active refrigeration for custom liquid-cooling loops. It is aimed at hobbyists and experimenters who want sub-ambient coolant temperatures for benchmarking or extreme overclocking projects. The unit requires integration into an existing water circuit and a separate power source for the TEC element.

Thermals noise and power

The Peltier module moves heat from the cold side into the liquid loop, so the radiator must dissipate both the component load and the TEC's own power draw. Expect noticeably higher heat output into the room and increased pump workload compared with a standard water block. No fan or radiator is included, so acoustic results depend entirely on the builder's chosen cooling hardware.

Privalumai

  • TEC Peltier module provides active sub-ambient cooling
  • Liquid-cooling loop efficiently transfers heat away from CPU
  • DIY kit enables custom refrigeration system builds
  • Integrated fan assists radiator heat dissipation

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How do I mount the Peltier module between the cold plate and the radiator in a custom loop?

Place the cold face on the CPU cold plate with thermal paste, attach the hot face to a water block that feeds the radiator, and seal the assembly so no coolant leaks onto the electrical contacts.

What ongoing upkeep does the thermoelectric cooler require in a liquid loop?

Inspect the thermal interface each time you drain the loop, watch for condensation on the cold side, and replace the module if its temperature delta drops noticeably.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.