Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Square 80 mm black axial fan with centre hub and mounting holes

Fans

Fans MMF-08D24ES-AM4Size case fan 80 25 24 .13

SKU CH-3SY6-FMM2S MPN MMF-08D24ES-AM4Size

A 24 V axial case fan measuring 80 mm by 25 mm draws 0.13 A for compact cooling

  • 24 V DC supply powers industrial and medical equipment reliably
  • 80 mm square frame fits tight enclosures with 25 mm depth
  • Low 0.13 A draw reduces energy cost in continuous operation
  • Axial blade design delivers efficient airflow through heat exchangers
  • Mitsubishi build quality supports rail, EV and supermarket applications

Mitsubishi 80 mm 24 V axial fan

This Mitsubishi axial fan measures 80 by 80 by 25 mm and runs on 24 V at 0.13 A. It is built for tight spaces where a slim profile and low noise are required. The unit suits industrial, medical and embedded cooling tasks.

Suited for 24 V systems with 80 mm mounts

Engineers designing equipment that provides a 24 V rail and an 80 mm mounting grid will find this fan a direct fit. Buyers whose chassis only accepts larger frame sizes or who need a different operating voltage should look at other models.

24 V 0.13 A electrical rating

The fan draws 0.13 A at 24 V, a figure that determines whether your power budget and connector can support it. Verify that your supply delivers 24 V and that the current draw fits your design before ordering.

Privalumai

  • 24 V DC supply powers industrial and medical equipment reliably
  • 80 mm square frame fits tight enclosures with 25 mm depth
  • Low 0.13 A draw reduces energy cost in continuous operation
  • Axial blade design delivers efficient airflow through heat exchangers
  • Mitsubishi build quality supports rail, EV and supermarket applications

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How do I mount the 80 mm frame and which orientation mistake should I avoid?

Use the four corner holes on the 80 by 80 mm square; the airflow arrow must point toward the heat source, otherwise the fan pulls air the wrong way.

What part will wear out first and when should I plan a replacement?

The sleeve bearing inside the motor is the only moving part; expect it to need a swap after several years of continuous 24 V operation.

At what point does the 0.13 A limit become a constraint during long runs?

The 0.13 A draw is fixed by the 24 V design; sustained use will not exceed it, so the first limit you hit is the bearing life, not current.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.