INITMMO 1200x300mm Magnetic Dust Filter 2-Pack Black
- INITMMO 2 x 1200*30…
- not_applicable
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Digital fan controller manages one or two 12V/24V fans with adjustable 104–230°F range, 40A relays, IP54 rating, and 10-second delayed second-fan start
The FASTSTORM RL104061 digital thermatic fan switch kit manages one or two electric cooling fans on 12 volt or 24 volt vehicle systems. It replaces part number 0444 and fits Thermatic electric fans, electric water pumps and compatible cooling systems. The kit includes pre-labelled wiring, mounting hardware and the required 24 volt relays for a direct installation.
An LED display shows real-time and set temperatures in Celsius or Fahrenheit across a 104 to 230 degree Fahrenheit range. The controller activates the first fan at the set point and starts the second fan after a 10 second delay to prevent circuit overload. Fans run until the air temperature drops 1 degree Celsius below the target, with a default shut-off at 96 degrees Fahrenheit. Dual 40 amp relays handle up to 50 amps maximum current through 12 AWG wiring.
This unit replaces simple on-off thermostats that lack dual-fan staging, voltage flexibility or a visible temperature readout. The jump is worth it when a build runs dual electric fans, operates on a 24 volt system or needs precise set-point adjustment without guesswork. It is not for installations that require variable-speed PWM control or CAN bus integration.
| Brand | FASTSTORM |
|---|---|
| Model | RL104061 |
| Product name | Digital Thermatic Fan Switch Kit FASTSTORM |
| voltage | 12 volts_of_direct_current |
| electrical usage (watts) | 40 amps, 12 volts_of_direct_current |
| weight | 0.7 pounds |
| description | Digital Thermatic Fan Switch Kit, FASTSTORM, RL104061, 104061, touch, Thermatic Electric Fans, EWPs, vehicles with compatible cooling systems |
| finish | Copper |
| material | Paper |
| dimensions | 6 in x 4 in x 3 in |
Mount the sensor between the radiator fins and follow the included wiring diagram to connect the controller to the 12V or 24V electrical system using the pre-labeled 12AWG wires and dual 40A relays.
The two 40A relays rated to 50A max current are the primary service items; the kit includes replacement 24V relays if you convert the system voltage.
The controller turns the fans off automatically when the temperature falls 1°C below the set point, with a default hysteresis that shuts off at 96°F when set to 104°F.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?