Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two black and red DDR4 desktop memory modules with low-profile heatspreaders

G.SKILL

G.SKILL F4-3000C16D-16GISB 16GB (2×8GB) DDR4 3000 CL16 desktop RAM

SKU CH-BKXK-BSKXT MPN F4-3000C16D-16GISB

Dual-channel 16 GB DDR4 kit running at 3000 MT/s with CL16 timings and 1.35 V for Intel XMP 2.0 or AMD X570 platforms

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3000 (PC4 24000)
  • CAS LatencyCL16
  • Timing16-18-18-38
  • Voltage1.35V

Capacity 16GB (2 x 8GB)

Speed DDR4 3000 (PC4 24000)

CAS Latency CL16

  • Dual-channel 16 GB kit doubles bandwidth for smoother multitasking
  • DDR4 3000 speed delivers 24000 MT/s data rate for faster loads
  • CL16 16-18-18-38 timings reduce latency in games and apps
  • 35 V operation cuts power draw versus standard DDR4 voltage
  • Intel XMP 2.0 profile enables one-click overclock on supported boards

Aegis DDR4 3000 dual-channel kit

This G.SKILL Aegis kit provides 16 GB of DDR4 memory in two matched 8 GB modules. It runs at 3000 MT/s with CL16 timings of 16-18-18-38 at 1.35 V. The modules are unbuffered and support Intel XMP 2.0 for automatic configuration on compatible platforms.

288-pin DDR4 compatibility

The kit uses standard 288-pin DDR4 DIMMs that install in dual-channel motherboard slots. XMP 2.0 profiles load rated speed and timings without manual entry. Mixing this kit with other modules is not recommended because kits are validated as a matched set.

Gaming builds on listed Intel and AMD chipsets

The memory is validated for AMD X570 and Intel X299, Z690 DDR4, Z590, Z490, Z390, Z370, Z270 platforms. Builders using other chipsets or requiring different speeds, voltages or capacities should select a kit specified for those requirements.

Privalumai

  • Dual-channel 16 GB kit doubles bandwidth for smoother multitasking
  • DDR4 3000 speed delivers 24000 MT/s data rate for faster loads
  • CL16 16-18-18-38 timings reduce latency in games and apps
  • 35 V operation cuts power draw versus standard DDR4 voltage
  • Intel XMP 2.0 profile enables one-click overclock on supported boards

Specifikacijos

BrandG.SKILL
SeriesAegis
ModelF4-3000C16D-16GISB
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 3000 (PC4 24000)
CAS LatencyCL16
Timing16-18-18-38
Voltage1.35V
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack / Red
FeaturesOverclock performance DDR4 memory designed for compatible Intel or AMD platforms.
Intel XMP 2.0 Support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the rated XMP overclock speed and system sta
Recommend UseAMD X570
Intel X299 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270
Siuntos svoris0.07 kg
Pakuotės dydis150 × 142 × 14 mm

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will this kit run at its rated speed on my Intel Z590 motherboard?

The kit is an Intel XMP 2.0 profile memory tested for Z590 platforms; enable XMP in the BIOS to reach the rated 3000 MT/s.

Do I need to change the memory voltage in the BIOS for this kit?

The rated voltage is 1.35 V; most boards apply it automatically when XMP is enabled, otherwise set 1.35 V manually.

Can I add a second identical kit later for a total of four modules?

The manufacturer advises against mixing kits; if you need more capacity, buy a single matched kit of the desired size.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.