Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Gulfe ATX power supply unit, black metal casing, single fan, standard connector layout

Gulfe

Gulfe ATX Power Supply for HP Pavilion H8 1088TW 1098HK 1104 1110T

SKU CH-JD99-GFXRE

An ATX power supply with reduced depth that replaces legacy units in compatible HP Pavilion desktops and provides 24-pin, 4-pin, SATA, LP4 and floppy connectors

  • TypeATX
  • Fans1
  • Weight2.5
  • Direct replacement for HP Pavilion H8 series desktops
  • ATX form factor with reduced depth for wider case fit
  • Over-current and over-power protection safeguards components
  • 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors included
  • Tested for low ripple and noise with 17 ms hold-up time

HP Pavilion H8 Compatibility

This Gulfe ATX power supply replaces the original unit in HP Pavilion H8 1088TW, 1098HK, 1104 and 1110T desktops. It delivers the standard +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB rails through a 24-pin ATX connector, a 4-pin P4-12V connector, three SATA connectors, two LP4 connectors and a floppy connector.

Reduced Depth Upgrade

The reduced depth design improves fit inside the compact Pavilion H8 chassis where a standard ATX unit may interfere with drive cages or cabling. Builders swapping a failed or noisy legacy supply gain over-current and over-power protection plus high-efficiency operation without modifying the case.

Sustained Load Behaviour

Under continuous load the supply maintains low ripple and noise thanks to Hi-Pot tested components. Hold-up time is rated at 17 ms minimum at nominal input while rise time stays below 70 ms, supporting stable voltage delivery during extended work sessions.

Privalumai

  • Direct replacement for HP Pavilion H8 series desktops
  • ATX form factor with reduced depth for wider case fit
  • Over-current and over-power protection safeguards components
  • 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors included
  • Tested for low ripple and noise with 17 ms hold-up time

Specifikacijos

BrandGulfe
TypeATX
Fans1
Weight2.5

Klausimai apie šią prekę

Will the 5.86" x 3.3" reduced-depth ATX chassis fit inside my HP Pavilion H8 case?

The unit measures 5.86 inches deep by 3.3 inches wide, matching the reduced-depth ATX form factor specified for the H8 1088TW, 1098HK, 1104 and 1110T models.

Which cables must I connect during installation, and which connector do builders often forget?

Connect the 24-pin ATX (20+4), the P4 4-pin 12 V, three SATA 15-pin, two LP4 4-pin and the floppy 4-pin; the P4 4-pin CPU power lead is the one most frequently missed.

How long should the hold-up time of 17 ms and the 70 ms rise time last before the supply needs replacement?

Those figures are design specifications; the supply itself has no scheduled replacement interval, but watch for fan noise, voltage drift or unexpected shutdowns as signs of aging.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.