Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

HP

HP 632639-001-R 2.5" 800GB SAS 6Gb/s MLC enterprise SSD

SKU CH-C7RM-H9653 MPN 632639-001-R

A 2.5-inch enterprise drive with 800GB of MLC storage and a SAS 6Gb/s interface

  • Form Factor2.5"
  • Capacity800GB
  • Memory ComponentsMLC
  • InterfaceSAS 6Gb/s
  • Enterprise-grade reliability with MLC NAND for sustained write endurance
  • 800 GB capacity fits large datasets in a single 2.5" bay
  • SAS 6 Gb/s interface delivers consistent throughput for server workloads
  • Refurbished condition offers cost-effective storage expansion for data centres
  • HP 632639-001-R model ensures compatibility with supported ProLiant platforms

800 GB SAS enterprise SSD

This 2.5 inch solid-state drive uses MLC memory and a SAS 6Gb/s interface to deliver 800 GB of capacity. It is built for server environments that require consistent write endurance and reliability. The refurbished condition means the unit has been tested and restored to working order. It suits administrators who need proven enterprise storage without new-unit lead times.

Hot-plug tray installation and firmware alignment

The drive fits standard 2.5 inch hot-plug trays found in HP ProLiant and compatible servers, so physical insertion takes seconds. Most issues arise when the controller firmware or backplane expander firmware is outdated, causing the drive to negotiate at a lower link speed or to be invisible to the RAID BIOS. Applying the latest system firmware before installation avoids these detection problems. Cable routing in dense chassis can also pinch the SAS connectors if care is not taken.

Steady write latency under sustained load

MLC architecture provides predictable latency during long sequential write workloads such as database logging or virtual machine image streaming. The SAS 6Gb/s link maintains throughput without the sharp throttling seen in consumer drives after their cache fills. Thermal throttling is minimal in typical server airflow, so performance remains stable across extended duty cycles. Workloads that exceed the rated write endurance will eventually wear the cells, so capacity planning should account for total bytes written.

Privalumai

  • Enterprise-grade reliability with MLC NAND for sustained write endurance
  • 800 GB capacity fits large datasets in a single 2.5" bay
  • SAS 6 Gb/s interface delivers consistent throughput for server workloads
  • Refurbished condition offers cost-effective storage expansion for data centres
  • HP 632639-001-R model ensures compatibility with supported ProLiant platforms

Specifikacijos

BrandHP
Model632639-001-R
Form Factor2.5"
Capacity800GB
Memory ComponentsMLC
InterfaceSAS 6Gb/s
Siuntos svoris0.45 kg
Pakuotės dydis254 × 203 × 127 mm

Klausimai apie šią prekę

How can I verify the 800GB SAS drive is working correctly after installation?

Check the server BIOS or RAID controller to confirm the 800GB capacity is detected and the SAS 6Gb/s link speed is negotiated.

What is included with the refurbished 632639-001-R unit and what must I source separately?

The package contains the 2.5" MLC SSD only; a compatible SAS backplane, caddy, cables and RAID controller are not included.

Which capacity version of this HP enterprise SSD should I select for a 2.5" SAS bay?

This specific model 632639-001-R is offered in a single 800GB capacity with MLC memory and a SAS 6Gb/s interface.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.