Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
HP ProCurve 610 816W external power supply unit J8169A

HP

HP ProCurve 610 816W External Power Supply J8169A

SKU CH-W6ZQ-5W9PY

Delivers 816 W total output via four external ports, each pair supplying 408 W to one device or 204 W each to two switches

  • TypeProprietary Power Supply
  • 816 W total output powers multiple devices
  • 100–240 V AC input works worldwide
  • Four external ports connect up to four switches
  • Each port pair delivers 408 W to one device
  • 50 V DC output matches ProCurve 610 requirements

HP ProCurve 610 816W External Power Supply

The HP ProCurve 610 816W External Power Supply J8169A is a proprietary AC-to-DC unit built for compatible HP networking equipment. It accepts an input range of 100 V AC to 240 V AC and delivers a 50 V DC output. The unit is intended for administrators who need redundant or additional power for supported switches.

816W total across four EPS ports

The supply provides 816 W of total output power distributed over four external power supply ports. Each pair of ports can supply a maximum of 408 W to a single device. When both ports in a pair are connected to two separate switches, each device receives 204 W. This architecture determines how many devices can run at full capacity simultaneously.

Proprietary 50 V DC output interface

The decisive specification is the proprietary 50 V DC output delivered through the dedicated EPS port pairs. Compatibility is limited to HP hardware designed for this exact voltage and connector layout. Builders using standard ATX power supplies or equipment expecting a different DC voltage cannot use this unit.

Privalumai

  • 816 W total output powers multiple devices
  • 100–240 V AC input works worldwide
  • Four external ports connect up to four switches
  • Each port pair delivers 408 W to one device
  • 50 V DC output matches ProCurve 610 requirements

Specifikacijos

TypeProprietary Power Supply

Klausimai apie šią prekę

Will the 816 W external power supply run reliably alongside the older ProCurve 610 switches I already have in the rack?

Yes, it is designed for the 610 series and delivers 50 V DC at up to 816 W total across four EPS ports.

How can I confirm the J8169A unit is operating correctly once it is connected?

Each EPS port pair supplies a maximum of 408 W to a single switch or 204 W each when two switches are attached, so the attached switches should power up and remain stable under load.

What cables or accessories come in the box with the 816 W power supply, and what must I purchase separately?

The unit provides four external power supply ports for direct connection to compatible switches; an AC power cord for the 100 V to 240 V input is not included and must be sourced separately.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.