Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver 3.5 inch bare SAS hard drive with circuit board visible

HP

HP QK703A 3TB 7200 RPM SAS 6Gb/s 3.5" internal hard drive

SKU CH-M3HK-8MWG2 MPN QK703A

A 3TB 7200 RPM SAS 6Gb/s 3.5" internal hard drive built for server workloads

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity3TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • UsageIdeal for Servers
  • 3 TB capacity stores large datasets
  • 7200 RPM spindle delivers fast sequential access
  • SAS 6 Gb/s interface enables high-throughput server connectivity
  • 5 inch form factor fits standard drive bays
  • HP Qualified Option ensures validated enterprise compatibility

Capacity and interface

The HP QK703A is a 3.5 inch internal hard drive with a 3TB capacity and a SAS 6Gb/s interface. It spins at 7200 RPM and is designed for server environments that require reliable bulk storage. The bare-drive packaging means it arrives without a mounting tray or cables.

Packaging and compatibility

Supplied as a bare drive, the unit includes no carrier, screws or software utilities. System builders must provide a compatible SAS backplane or controller and a 3.5 inch drive bay to install it. The drive is qualified by HP for use in supported server platforms.

Build and connectors

The 3.5 inch form factor uses a standard SAS connector for both data and power, allowing hot-plug capability in supported enclosures. A 7200 RPM spindle speed delivers consistent throughput for sequential workloads. The bare metal construction is intended for installation inside a locked server chassis.

Privalumai

  • 3 TB capacity stores large datasets
  • 7200 RPM spindle delivers fast sequential access
  • SAS 6 Gb/s interface enables high-throughput server connectivity
  • 5 inch form factor fits standard drive bays
  • HP Qualified Option ensures validated enterprise compatibility

Specifikacijos

BrandHP
ModelQK703A
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity3TB
RPM7200 RPM
Average Latency6Gb/s
UsageIdeal for Servers
Form Factor3.5"
Siuntos svoris1.81 kg
Pakuotės dydis318 × 216 × 140 mm

Klausimai apie šią prekę

What maintenance or replacement will the HP QK703A 3TB SAS drive need later?

As a mechanical hard drive, the bearings and spindle motor will wear over years of continuous operation; plan to replace the drive once SMART attributes show reallocated sectors or seek errors rise.

What limit appears first on the 7200 RPM SAS 6Gb/s interface during sustained use?

The 7200 RPM spindle caps sequential throughput at the drive's sustained media rate, so long writes hit that mechanical ceiling before the 6Gb/s SAS link saturates.

How much noise, heat and power does the 3.5" 7.2K drive produce running all day in a server?

The 3.5 inch 7.2K drive emits typical enterprise seek noise, warm exhaust air and draws standard 3.5 inch HDD power; ensure the chassis provides adequate airflow for continuous duty.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.