Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Three black 120mm square case fans with ARGB infinity-mirror centres and daisy-chain cables

Jungle Leopard

Jungle Leopard Interstellar V2 RS 120mm ARGB Case Fan 3-Pack Black

SKU CH-Q73C-RGGEH

Three 120 mm hydraulic-bearing fans deliver 68 CFM each at up to 1850 RPM with ARGB lighting and daisy-chain cabling

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color Black-Forward

  • Hydraulic bearing runs quietly at 29 dBA
  • Daisy-chain slide-in pins let one cable power three fans
  • Infinity mirror side panels create soft ARGB glow
  • 68 CFM airflow at 2.4 mmH₂O pressure
  • Black 120 mm frame fits standard 360 mm radiator mounts

Three-Fan ARGB Kit for Case Cooling

This triple pack supplies three 120 mm case fans with addressable RGB lighting and hydraulic bearings. Each unit spins between 900 and 1850 RPM to move up to 68 CFM at a rated 2.4 mmH₂O static pressure. The fans connect via standard 4-pin PWM headers and fit any chassis designed for 120 mm mounting points.

Daisy-Chain Infinity Mirror Lighting

A slide-in pin-to-pin interlock lets the three fans share a single ARGB and power cable run, reducing internal clutter and installation time. Each frame integrates an infinity mirror module on the side that creates a layered lighting effect, while the centre hub uses a non-illuminated CD-pattern finish for a cleaner look when the LEDs are off.

Hydraulic Bearing Build with Vibration Pads

The hydraulic bearing is rated for quiet operation below 32 dB(A), and eight corner damping pads further cut resonance to a measured 29 dB(A). Nylon-mesh sleeving protects the daisy-chain cables from abrasion, and the 25 mm thick frames align with standard 120 mm screw patterns for straightforward mounting on cases or 360 mm radiators.

Privalumai

  • Hydraulic bearing runs quietly at 29 dBA
  • Daisy-chain slide-in pins let one cable power three fans
  • Infinity mirror side panels create soft ARGB glow
  • 68 CFM airflow at 2.4 mmH₂O pressure
  • Black 120 mm frame fits standard 360 mm radiator mounts

Specifikacijos

BrandJungle Leopard
SeriesInterstellar
ModelInterstellar V2 RS
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM900-1850RPM
Air Flow68CFM
Air Pressure2.4mmH20
Noise Level<32dB(A)
Power Connector4 Pin
ColorBlack
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How long will the hydraulic bearings last before they need replacement?

Hydraulic bearings are rated for long continuous operation; the fan runs at 900-1850 RPM with a noise floor of 29 dBA, indicating low wear under normal use.

What limits airflow when the fans run at 1850 RPM for hours?

At maximum speed each fan delivers 68 CFM and 2.4 mmH2O static pressure; the 25 mm thick blade design and bionic blade angle set the practical airflow ceiling.

How much noise and heat do the three fans add when running all day?

The trio stays below 32 dB(A) at full speed, uses a 4-pin PWM connector for automatic speed control, and the hydraulic bearing plus eight damping pads keep vibration and extra heat minimal.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.