Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
White 120mm square case fan with ARGB infinite mirror lighting and hydraulic bearing

Jungle Leopard

Jungle Leopard Prism6 PRO ARGB 120mm Case Fan White 1-Pack

SKU CH-VXE4-EGRJ0

120 mm PWM case fan with infinite-mirror ARGB lighting, 1600 RPM peak speed, 61.5 CFM airflow and 30 dBA noise

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White Forward-1Pack

  • Infinite mirror ARGB creates depth from every angle
  • 1600 RPM PWM delivers 61.5 CFM airflow
  • Hydraulic bearing runs at 30 dBA
  • 3 / 4-pin connector fits most motherboards
  • White 120 mm frame includes four mounting screws

Prism6 PRO 120mm ARGB Fan

The Jungle Leopard Prism6 PRO is a 120mm case fan designed for builders who want addressable RGB lighting and hydraulic-bearing reliability. It fits standard 120mm mounting points in PC chassis and CPU coolers. The single-fan pack includes four self-tapping screws for straightforward installation.

Sustained Load Behaviour

At full load the fan runs at 1600RPM ± 10% and delivers 61.5CFM of airflow with 2mmH2O static pressure. PWM control allows the speed to scale between 765 and 1600RPM so noise stays at or below 30dBA under typical thermal loads. The hydraulic bearing maintains consistent performance during extended operation.

Interface and Lighting Limits

The fan uses a combined 3/4-pin power connector for PWM speed control and a separate 3-pin 5V ARGB header for lighting. Synchronisation depends on motherboard or controller support for 5V addressable RGB. Without a compatible 5V header the lighting cannot be customised or synced with other components.

Privalumai

  • Infinite mirror ARGB creates depth from every angle
  • 1600 RPM PWM delivers 61.5 CFM airflow
  • Hydraulic bearing runs at 30 dBA
  • 3 / 4-pin connector fits most motherboards
  • White 120 mm frame includes four mounting screws

Specifikacijos

BrandJungle Leopard
SeriesPrism6 PRO
ModelJL Prism6 PRO BK
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM1600RPM
Air Flow61.5CFM
Air Pressure2mmH2O
Noise Level= 30dBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How loud is the Prism6 PRO ARGB at its maximum 1600 RPM speed when running continuously?

The fan produces 30 dBA at full load, which is generally considered quiet for a 120 mm case fan operating at 1600 RPM.

Does the Prism6 PRO ARGB require a 5 V 3-pin ARGB header on my motherboard to control the infinite mirror lighting?

Yes, the ARGB lighting must be connected to a 5 V 3-pin addressable RGB header or a compatible controller for synchronization and customization.

Will the 120 mm Prism6 PRO fit alongside my existing 25 mm thick fans using the same mounting holes?

Yes, it uses the standard 120 × 120 × 25 mm frame and includes four self-tapping screws, so it aligns with typical 120 mm mounting patterns.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.