Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Three white 120mm square fans with transparent blades and ARGB lighting in a retail box

Jungle Leopard

Jungle Leopard Prism6 PRO ARGB 120mm Case Fan White 3-Pack

SKU CH-BXRW-7F053

Three 120 mm fans with infinite-mirror ARGB lighting, PWM control up to 1600 RPM and 61.5 CFM airflow at 30 dBA

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White Forward-3Pack

  • Infinite mirror ARGB creates layered lighting from any angle
  • PWM control adjusts speed between 765 and 1600 RPM for thermal balance
  • 5 CFM airflow at 30 dBA delivers quiet cooling performance
  • Hydraulic bearing reduces friction for stable long-term operation
  • Three fans included with self-tapping screws for quick installation

Three-Fan Kit with Infinite Mirror ARGB

This pack contains three 120 mm Prism6 PRO case fans finished in white. Each unit uses a hydraulic bearing and PWM control to spin between 765 and 1600 RPM. The kit targets builders who want coordinated lighting and airflow across multiple mounts without buying single fans separately.

Hydraulic Bearing and Dual Connector Layout

The hydraulic bearing is designed for low friction and a 30 dBA noise ceiling at full speed. Both 3-pin and 4-pin power headers are provided so the fans can plug into either voltage-controlled or PWM headers on the motherboard. Four self-tapping screws per fan simplify mounting on chassis panels or radiators.

5 V ARGB Sync Limitation and Static Pressure Ceiling

Addressable RGB lighting requires a 5 V 3-pin header or compatible controller; the fans will not illuminate from a 12 V 4-pin RGB socket. Maximum static pressure is rated at 2 mmH2O, which suits open mesh intakes but limits effectiveness on dense radiators or restrictive filters.

Privalumai

  • Infinite mirror ARGB creates layered lighting from any angle
  • PWM control adjusts speed between 765 and 1600 RPM for thermal balance
  • 5 CFM airflow at 30 dBA delivers quiet cooling performance
  • Hydraulic bearing reduces friction for stable long-term operation
  • Three fans included with self-tapping screws for quick installation

Specifikacijos

BrandJungle Leopard
SeriesPrism6 PRO
ModelJL Prism6 PRO BK
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM1600RPM
Air Flow61.5CFM
Air Pressure2mmH2O
Noise Level= 30dBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What does the 3 / 4 Pin power connector cap the PWM control at?

The fan runs at a rated speed of 765 to 1600 RPM with PWM control via the 4-pin connector, while the 3-pin connection provides fixed voltage operation.

What mounting hardware fits the 120 mm × 120 mm × 25 mm frame?

Four self-tapping screws are included for standard 120 mm fan mounting holes on cases or radiators.

How is the ARGB lighting connected and what step is often missed?

Connect the 3-pin 5 V ARGB header to the motherboard or a controller; the separate 4-pin PWM fan header must also be plugged in for speed control.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.