Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular circuit board with castellated module, USB-C port and pin headers

KEHIPI

KEHIPI ESP32-C6-DEV-KIT-N8-M development board

SKU CH-QY6K-X2AJ9

ESP32-C6 RISC-V board with WiFi 6, Bluetooth 5 and 802.15.4, 160 MHz processor, 8 MB flash, USB-C and castellated module

  • RISC-V processor runs at 160 MHz for fast edge computing
  • WiFi 6 and Bluetooth 5 give modern wireless connectivity
  • IEEE 802.15.4 enables Zigbee 3.0 and Thread mesh networks
  • USB Type-C with CH343 and CH334 chips simplifies development
  • Castellated module design allows direct soldering to carrier boards

ESP32-C6 Development Board

The KEHIPI ESP32-C6-DEV-KIT-N8-M is a new IoT edge device built around the ESP32-C6-WROOM-1-N8 module. It uses a RISC-V 32-bit single-core processor running at up to 160MHz with 8MB of integrated Flash. Integrated WiFi 6, Bluetooth 5 and IEEE 802.15.4 wireless communication supports Zigbee 3.0 and Thread protocols. A Type-C connector links to onboard CH343 and CH334 chips for USB and UART development.

Makers needing multi-protocol wireless

This board suits developers building Matter, Thread or Zigbee 3.0 devices who want native IEEE 802.15.4 support alongside WiFi 6 and Bluetooth 5. The castellated module allows direct soldering to custom carrier boards for compact production designs. Builders who need dual-core processing or higher clock speeds for intensive local compute should look at other architectures.

8MB Flash capacity

The module provides 8MB of built-in Flash storage for firmware and application data. This capacity determines the maximum program size and persistent data space available without external memory chips. Verify that your intended firmware image and data logging requirements fit within this limit before committing to the platform.

Privalumai

  • RISC-V processor runs at 160 MHz for fast edge computing
  • WiFi 6 and Bluetooth 5 give modern wireless connectivity
  • IEEE 802.15.4 enables Zigbee 3.0 and Thread mesh networks
  • USB Type-C with CH343 and CH334 chips simplifies development
  • Castellated module design allows direct soldering to carrier boards

Specifikacijos

Brandwaveshare
ModelESP32-C6-DEV-KIT-N8-M
Part NumberESP32-C6-DEV-KIT-N8-M

Klausimai apie šią prekę

What header pitch matches the castellated edge for breadboard or carrier-board use?

The board matches the ESP32-C6-DevKitC-1-N8 pinout, so standard headers fit the castellated edge for breadboard or carrier-board use.

Which driver is needed for the CH343 USB-to-UART chip so the board appears as a COM port?

Install the CH343 driver on the host PC; the Type-C connector then enumerates as a virtual COM port for flashing and serial debug.

When should the 8 MB flash be re-flashed or the module replaced?

Re-flash the 8 MB flash if firmware becomes corrupted; replace the module only if the RISC-V core or RF front-end fails.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.