Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green Raspberry Pi Pico W board with pre-soldered header pins, USB cable, pinout card and stickers

KEHIPI

KEHIPI Raspberry Pi Pico W Pre-Soldered Header Development Board

SKU CH-72Y8-EXPM2

Pre-soldered Raspberry Pi Pico W board with dual-core Arm Cortex-M0+ processor, 2.4 GHz 802.11n wireless LAN and Bluetooth 5.2, plus USB cable and pinout references

  • Pre-soldered headers let you start prototyping immediately
  • Dual-core Arm Cortex-M0+ at 133 MHz handles real-time tasks
  • 4 GHz 802.11n plus Bluetooth 5.2 adds wireless connectivity
  • 26 GPIO pins with 16 PWM channels expand I/O options
  • MicroPython, C and Java tutorials with downloadable projects accelerate learning

Raspberry Pi Pico W with Pre-Soldered Headers

This development board pairs a dual-core Arm Cortex-M0+ processor running up to 133 MHz with 2.4 GHz 802.11n wireless LAN and Bluetooth 5.2. It provides 264 KB SRAM and 2 MB flash alongside 26 multifunction GPIO pins. The kit includes a USB cable, pinout card and stickers for immediate prototyping.

Makers Learning Embedded Programming

The board suits hobbyists and students who want a compact platform with built-in wireless and pre-soldered headers for breadboard use. Tutorials cover MicroPython, C and Processing with downloadable project code. Builders needing analog output or more than 26 GPIO pins should consider other platforms.

26 Multifunction GPIO Pins

This pin count determines how many sensors, actuators or displays you can connect simultaneously. The board also exposes 16 PWM channels, 3 ADC inputs, 2 UART, 2 SPI and 2 I2C interfaces. Verify your project's I/O requirements against these fixed resources before purchasing.

Privalumai

  • Pre-soldered headers let you start prototyping immediately
  • Dual-core Arm Cortex-M0+ at 133 MHz handles real-time tasks
  • 4 GHz 802.11n plus Bluetooth 5.2 adds wireless connectivity
  • 26 GPIO pins with 16 PWM channels expand I/O options
  • MicroPython, C and Java tutorials with downloadable projects accelerate learning

Specifikacijos

BrandFREENOVE
ModelFNK0065C
Part NumberFNK0065C

Klausimai apie šią prekę

Will the pre-soldered header pins need replacement after repeated breadboard use?

The board ships with a pre-soldered header already installed, so no initial soldering is required; the pins are rated for typical prototyping cycles.

What limits sustained performance when the dual-core Arm Cortex-M0+ runs at 133 MHz continuously?

The 264 KB on-chip SRAM and 2 MB QSPI flash set the memory ceiling, while the 2.4 GHz 802.11n wireless LAN and Bluetooth 5.2 radio share the same power budget.

How much heat and power draw should I expect when the board runs all day with Wi-Fi and Bluetooth active?

The Pico W draws modest current from the USB supply; with 2.4 GHz 802.11n and Bluetooth 5.2 active it warms slightly but stays within normal operating temperature without a heatsink.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.