Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

KHACHIMO

KHACHIMO OZP-170-12/15-J00 12V 14A 15V 11.2A power supply

SKU CH-23XM-DPTFB

Delivers dual 12V 14A and 15V 11.2A rails from a 170W ATX switching supply

  • TypeATX
  • Dual-voltage output powers 12 V and 15 V rails
  • 170 W total capacity supports demanding components
  • 14 A on 12 V rail delivers strong current
  • 2 A on 15 V rail provides stable power

ATX power supply for dual-voltage systems

This ATX switching power supply delivers 12 V at 14 A and 15 V at 11.2 A. It suits builds or test benches that require both rails from a single unit. The 170 W combined rating covers moderate industrial or embedded workloads.

Steady output under continuous load

The dual-rail design maintains rated current without the short-burst peaks seen in some consumer units. Builders needing sustained 12 V and 15 V delivery should verify total draw stays within the 170 W limit. Systems demanding higher single-rail current or additional voltage rails will need a different solution.

Privalumai

  • Dual-voltage output powers 12 V and 15 V rails
  • 170 W total capacity supports demanding components
  • 14 A on 12 V rail delivers strong current
  • 2 A on 15 V rail provides stable power

Specifikacijos

TypeATX

Klausimai apie šią prekę

How much heat and noise should I expect from the 170 W unit when it runs continuously?

The OZP-170-12/15-J00 delivers up to 170 W across its 12 V 14 A and 15 V 11.2 A rails; actual heat and fan noise depend on load and case airflow.

Which connectors or cables must my system already provide for this ATX supply to work?

As an ATX power supply it uses standard motherboard and peripheral connectors; ensure your board has a 24-pin ATX and the required CPU power headers.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.