Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
KHACHIMO PJA150F-12 150W ATX power supply unit

KHACHIMO

KHACHIMO PJA150F-12 150W ATX Switching Power Suppl

SKU CH-0RWZ-M19NF

ATX switching power supply delivering 150 W of continuous power for desktop PCs

  • TypeATX
  • 150 W output powers standard ATX builds
  • Tested working ensures reliable operation
  • Good quality components support stable delivery
  • ATX form factor fits typical chassis
  • First listed March 2024 indicates recent design

Compact ATX power for light builds

The KHACHIMO PJA150F-12 is a 150 W ATX switching power supply designed for low-draw systems such as thin clients, embedded PCs or basic office workstations. Its modest output suits builds that run integrated graphics and a single storage drive without extra peripherals.

Replaces aged low-wattage units

This unit steps in when an original 150 W supply fails or when a proprietary brick-form factor is swapped for a standard ATX footprint. The jump is worth it only if the replacement chassis accepts a regular ATX psu and the total system draw stays well below the 150 W ceiling.

Straightforward ATX installation

Mounting uses the four standard ATX screw holes and the main 24-pin connector plugs directly into the motherboard. What usually goes wrong is underestimating peak load — adding a discrete GPU or several drives can trip the over-current protection and shut the system down.

Privalumai

  • 150 W output powers standard ATX builds
  • Tested working ensures reliable operation
  • Good quality components support stable delivery
  • ATX form factor fits typical chassis
  • First listed March 2024 indicates recent design

Specifikacijos

TypeATX

Klausimai apie šią prekę

What ATX case clearance does this 150W unit need?

It follows the standard ATX form factor so any case with an ATX PSU bay will accept it.

Which cables must be connected first during installation?

Seat the 24-pin motherboard connector and the 4-pin CPU power plug before routing any peripheral leads.

When should the internal fan be cleaned on a supply first listed in 2024?

Blow dust from the fan intake every six to twelve months depending on case airflow.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.