Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver ATX power supply unit with ventilation grille and cable bundle

KHACHIMO

KHACHIMO PSR150-D 150W ATX Power Supply

SKU CH-V854-GPZRD

A 150 W ATX switching power supply for desktop PCs, supplied new and tested working

  • TypeATX
  • 150 W output powers typical desktop builds
  • ATX form factor fits standard PC cases
  • Tested working before shipment ensures reliability
  • Good quality components support stable operation
  • First listed by manufacturer in 2024

What this PSU powers

The KHACHIMO PSR150-D is a 150W ATX power supply built for basic desktop systems. It delivers the 12V rail and standard connectors a low-draw motherboard, integrated graphics and a few drives require. Buyers who need more wattage for discrete GPUs or heavy multi-core CPUs should look elsewhere.

When 150W is the right step up

This unit replaces older, lower-efficiency ATX supplies in office PCs, thin clients or embedded boxes that draw well under 150W. The jump is worth it when the existing PSU has failed, runs loud or lacks the connector mix the current board needs. Systems with dedicated graphics cards or high-TDP processors fall outside its design envelope.

ATX form-factor limits

The ATX footprint fits standard chassis cut-outs and mounting holes, but the 150W ceiling restricts the total component load you can install. First listed by the manufacturer in 2024, the design targets legacy and entry-level builds rather than modern high-performance platforms. Cable lengths follow the ATX specification for typical mid-tower layouts.

Privalumai

  • 150 W output powers typical desktop builds
  • ATX form factor fits standard PC cases
  • Tested working before shipment ensures reliability
  • Good quality components support stable operation
  • First listed by manufacturer in 2024

Specifikacijos

TypeATX

Klausimai apie šią prekę

What ATX form-factor clearance does the PSR150-D need inside the case?

It follows the standard ATX layout, so any chassis with an ATX power-supply bay will accept it.

Which cables must be connected first when installing the PSR150-D?

Seat the 24-pin motherboard connector and the 4- or 8-pin CPU power lead before routing peripheral cables, otherwise the board will not post.

When should the internal fan of the PSR150-D be cleaned?

Blow dust from the fan intake every 12 months to keep airflow steady and prevent thermal throttling.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.